Canvas is in decent condition. It came with my boat and I switched to black this year.
Its packed away and doing me no good. No poles and no windows. Just the fabric.
If anyone has interest its not gunna be expensive.
I just boarded my 330DA today and found my SA-1 vapor detector screaming away and both the "on/green" and "warning/red" lights lit on the controller.
No fumes from a sniff test. I've concluded that cleaning the bilge yesterday must have let water in somewhere and shorted the system.
Anyways my...
I just picked up a Donzi 21'. I am building a 572ci big block for it.
The internet seems to be all over the place on the subject of using aluminum in a salt water cooled engine.
Here is my question....
If I were to install Aluminum performance exhaust manifolds and an aluminum intake manifold...
I want to add a washdown pump to the vessel this year I'm familiar with the shurflo and jabsco units but I see this seaflow brand on eBay and the kit looks pretty well built. I'm hoping someone here has tried one out.
Now that my fuel lines are all 19 years old I think its time to change them. Im going to buy the fuel line in bulk length and have a local line/fitting shop install all the threaded ends.
Considering there are so many connection points I will to do one side at a time so I don't confuse how they...
Ive been kicking around the idea of adding autopilot but considering my boat is only 33' and I only travel 300-400 miles a season maybe its a luxury I should skip.
The main reason I started thinking about adding it was when I found that I need a rate compass to allow my radar to overlay my...
Is there any benefit to cleaning up the leading edges of the shaft struts and rudders? It seems to be commonly known that the submerged running gear of an inboard becomes a heavy drag above 25-30 mph. Why would the leading edges of my rudders be flat instead of tapered to a point?
I have a 1998 330 Sundancer and my gauges all work but can use a serious updating. I would like to avoid a wiring nightmare but would love to have later style (smartcraft maybe?)gauges.
I don't understand exactly which benefits I can get with the modern gauges but I would love to be able to...
I have a 1998 330 Sundancer and I'm ready to buy a new system.
My problem is I don't know which to choose. I have been reading online but my head is spinning with all the different opinions.
I do believe I want a broadband radar but.... Also the system must be mnea2000 complieant.
Is there a...
With my new stereo upgrade my house batteries need to be charged off the generator quite often. My current 20amp charger is not doing the trick. I would like to upgrade to 80amp or even 100 amp.
Or add a completely different charger for the house batteries only. The ones I found online are...
Can a Simrad 4g radar be adapted/used on a garmin system?
I want to buy the Garmin 4610 but want the broadband radar and it appears Garmin does not offer broadband.
Finally got my new to me 1998 330 dancer in the water. I have a few questions for those with experience with this model.
1 is it normal for the steering rudder shaft packing to drip 10-15 drops per minute?
A guy on the dock said its normal for them to weep a little when first put back in the...
My 1998 330da just got a 24x12 trim tab upgrade and I noticed that with tabs down they are right in front of the underwater exhaust outlets. I cant help but wonder how well a tab can work with massive amounts of bubbles passing under them. The stock size was 22x8 and were also positioned...
My boat is a 1998 330 sundancer. The original engines have been replaced with new Mercruiser 383 Scorpion 6.3 engines. These new engines are carbureted and have mechanical fuel pumps.
I have cranked both engines for a minimum total time of 4-5 min (not all at once) each. I have also poured raw...
I have a 1998 330 sundancer and want to replace my transducer for depth/temp.
I see different degree units available and don't know if mine is straight down or need one that is calibrated for an angle.
Kinda need a fast answer because my engines go back in on Tuesday.
Thanks
My Standard GX2320S is a counter sunk (not flush mount) unit and i would like to replace it.
It has a slightly angled face because of the dash angle.
I will soon be upgrading all my electronics and want my vhf to be nmea2000 compatible.
I intend to buy garmin GPS/radar but the radio does not...
My boat came with a 2006C which is no longer updatable and somewhat outdated.
Looks like a big job to replace the cables and antenna.
Is there a good option to update my old 2006C and be able to plug it right in?
Not looking for the best $ can buy. Just something that is better and will hold me...