Recent content by Plane 2 Sea

Getting some h2o in the center floor locker areas, where the shower sump box is located, and the floor locker forward of that.. Over 2" deep... Pretty puzzled.. Any ideas ? Looks like left over from last fall, missed looking when she was put away.. Have wet Vac'd out, cleaned up with Clorox wet...

Had our beloved '96 Dancer for 7 yrs now. All of a sudden we are seeing some white, foamy like blooming substance under the stereo area in the horizontal seams of the different interior pieces. Approx. 1/2" dia., several areas. Doesn't seem to smell, wipes right up. Has stopped for now, but has...

I installed marine A/P's for 18 yrs.... mostly raytheon/raymarine... most likely you've got air in the lines from the helm pump to the hydraulic steering ram that did not get fully "bled" out after the installation. If your not comfortable with the procedure have a qualified marine tech do it...

We use "Roll Off" to clean the non skid on the 'Dancer, leaves a nice film that allows stuff to be fairly easily rinsed off.... Other than a shot gun.....

and we're boating for the season!

page #30, post 3 292 has the details....

Page #30, post # 292 has the details.... of the re bedding details...

I did ALL the bow rails and cleats two seasons ago.. on our '96 330 Dancer... nuts and bolts all the way around.. I posted a full description about two yrs ago... have a GOOD friend assist you...used West Marine poly sealer an all bolts.. acetone to clean up the extra... note... original post...

That's it! Henderson products Deckadence! Anyone actually have experience with this stuff? Was soft on the feet, appears to be pretty tough.... Thx as always group!

Nope, not that stuff.... this stuff reminded me of open cell sponge material....or looked like scotch brite pad... but much softer....

While at the Miami Boat show recently, I saw a new type of Marine carpeting placed on the display 370 Sundancer.. I asked the Marine Max Rep what kind of carpet it was or who made it and He didn't know, said it had been placed there by someone? It was a kind of porous / fibre looking material...

we put 4 Inches of memory foam on top of OEM mattress, very comfy!

Normal in my experience on my '96 330 Dancer.. very marginal detents, you just need to get the reading stable with her running..

Yes, that usually worked for me also..this "crap" was left over from winter storage, and has been giving me fits all summer... Starbrite deck cleaner did not remove the hardened deposits..

I suspect you may have a wiring issue, recently found a disconnect behind the dash of our '96 330 'Dancer was'nt mated all the way, caused the stbd. fuel gauge to go full scale empty..if you have the wiring diag's for your boat you can trace the wires from the gauges, perhaps to disconnects in...