Thank you everyone for the help I just got the cover off by listening to what sfergson 727 said. Again thank you so much also the speakers are 160 watt Pansonic speakers. What's funny is searay mix and matched things. O well i can start my upgrade now knowing what my system is made up of...
Dennis i have tried to pull the covers off but i am nervous about craking the covers. Is there a certain way of doing this? The manual did not say anything about the speakers. I guess i want to know if i add a 100 x 4 alpine amp will i blow these speakers. I am on a little budject so i would...
I have a 2008 185 with a clarion head unit the speakers i am not sure of. Would anyone know what the factory put in and what the watts of those would be ?
How or what is the best way to fix this? I have seen thousands of different applications but don't know which is the best and IS THIS A DO IT YOURSELF TYPE OF JOB?
Due to the price of gas i started buying more inflatables. I just bought a Aquaglide water slide. With this and the blown up island we can just go to a quiet spot and chill for the day.:smt038
When i was younger both grandfathers had bayliners. One had a smaller one (bow rider) and the other had a larger crusing style. The bow rider is still running strong. I would say with anything you buy you can get trash or a real gem i believe that its the way you take care of it. What i have...
I need to get some advice on the steps of checking my depth finder. Its giving deeper depths then what it really is. I dont know the make of it other then it was on the boat so i Guess OEM it is going through the hull. Should i just buy all new parts?
I have the factory installed depth gauge and think its giving a wrong reading. I am somewhat new at troubleshooting things on a boat but if anyone could give me a starting point i would greatly appericate it.
Thank you
The trim switch was 50 something and the remote and y adpater two add a 2nd remote with and 24ft extention wire ran like 145 so i think all said in done around 215.00
I had the trim switch at the location of the stereo remote but the kids kept playing with it when getting back on board. So when i was told by my wife she was not jumping in and out of the boat to turn up the radio anymore we got a second remote and put in the location of the trim switch and...
Sure! the table i bought through west marina and then special ordered the mounting parts from garlick through west marina. The big thing i did was the leg was about 8 inches long then bent upwards i had the plate cut off and rewelded so the plate is welded right at the bend and i didnt lose...
I started thinking it would be nice to play some cards while on the boat. I had to do some research and some reconfiguring but this is what i came up with. Sorry the pictures i had to resize but here they come
I bought two flat footed jacks and mounted them both at the rear of the tires on my trailer. So if i ever have a blow out or flat its a sample flip down and crank the rear up on either side. But it also comes in handy for those long winter days when the boat sits, i jack the rear up so it...
This is something that once i started reading i want to get done as well. But a few questions for an 08 like i have i guess i should order the part that has the pins? And the last question is the marina i called they quoted the price for around 50 bucks i guess i should have asked but is that...
I have a few questions
1. Has anyone added a full length canvas top to a 185 or anything close in size.
2. Has anyone try to install a table to that size of boat i have seen thousands of types of tables just don't know which one i should go with.
Thanks in advance for the suggestions