Hope you guys are enjoying her. She's one sweet ride!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hope you guys are enjoying her. She's one sweet ride!
Hi Laurie and Mike,
I have same problem on mine. Where to get replacement parts?
Any one ever have this panel in the transom door out?
What is this and why is it there? Asking for no other reason than curiosity....
View attachment 39613
Taylor has the parts. Have to order thru your local Searay dealer. If Dealer cant find part numbers Ive found the best way to communicate with Taylor is to mail the old parts to them and ask for parts numbers. That always seems to work.Hi,
I am looking to replace the hinge covers on the wing windows.
Also need new window seals.
View attachment 46589
Taylor has the parts. Have to order thru your local Searay dealer. If Dealer cant find part numbers Ive found the best way to communicate with Taylor is to mail the old parts to them and ask for parts numbers. That always seems to work.
You can come off the battery but use a inline fuse for the max amperage the wire's rated for or size the fuse to the device you are going to feed to protect it.
I cruise my 340 DA at around 2800 rpm and 18 to 20 MPH. I burn about 14 to 16 Gal an hour. I just made a trip to lake Huron and back and that was my average even fighting the current up stream. At that speed I do have to go full tabs but I usually do anyway to keep the bow down. Id say the #'s will be slightly better in the EC because the engines are further forward and you don't have the bow rise as significantly as the DA.
Thanks. Is there any validity to the claim that vDrives are less efficient and drive at lower speeds and higher fuel consumption vs straight inboards?
early reading averaging 22-24mph @3000-3200 rpm cruise and 24-28 gph. WOT 34-38 mph @ 4000 rpm and 36-40 gph.
I purchased a set from Flounder pounder aka Searay Parts dot com. 300.00 I think.so has anyone replaced thier switch and guage panels on the helm ??
all 3 of mine have the corners broken off beside the screws.
any sources ??