darksilicon
New Member
- Aug 23, 2016
- 26
- Boat Info
- 1991 Sundancer 350, Raymarine C127 MFD, A-8 Apex Dinghy w/ 8HP 1995 Johnson Outboard.
- Engines
- Twin 7.4L Mercruiser 340HP
Might not help but Algonquin marine cast sells expensive bronze ones that work like a champBigsky
Go to yorkdesignandfab.com (you can also find them on Amazon by searching for “stuffing box wrench” I think)
I got a 3 1/2 wrench for the shaft stuffing boxes on my 83 SVR 310 and love it. Was about $45 but is the perfect tool for the job. The other alternative is to cut the handle off an old pipe wrench (since they are too long to use in the area under your engines if you have V drives like I do) but I highly recommend York. Great people to deal with. If you order a 3 1/2” wrench and it is the wrong size they will swap it out as long as you can figure out the size you need.