- Jun 5, 2016
- 5,641
- Boat Info
- 410 Sundancer
2001
12" Axiom and 9" Axiom+ MFD
- Engines
- Cat 3126 V-Drives
While I have upgraded everything with new components, its still the stock/factory configuration and wiring. I'm looking to add some better volume in the cockpit area, but spread it out a little (the arch speakers are 90% of the sound). Cabin sound is fine, no upgrade there necessary, but want to control volume independantly. Want to stay with Fusion Head/Amps if possible.
Current Components
Head - MS-RA770 Apollo 4 zone (Used only 2)
Amp - a JL Audio M600/6
Speakers
Zone 1
(Cockpit area) 4x Fusion MS-FR6022 6". Two at ankle level and 2 in the arch wired in parallel and powered by 1st amp channel.
Cockpit Sub 1x JL Audio M10 10" Subwoofer on 2nd amp channel (bridged)
Zone 3 (I skipped Zone 2 for future expansion)
Cabin/V-Berth Speakers 4x (Clarion?? Original to the boat) On the 3rd amp channel
Proposed
1) Cabin and V-Berth get split off into their own zones
Powered by the existing JL Audio M600/6 Gives the Cabin and V-Berth their own zone and volume control.
2) Add Fusion Apollo 6 Channel Amp and second set of speakers in arch
Channel 1 - Powers Zone 1 4x Arch Speakers in parallel Thinking of moving the existing Fusion speaker (now obsolete) to the arch so 4x 6"
Channel 2 - Powers Zone 1 Subwoofer (Bridged) Current Sub is 250W, this amp bridged is 580. May have to upgrade.
Channel 3 - Powers Zone 2 2x Speakers (Maybe add new speakers here).
Recommendations for system layout, speakers?
Fire away!!
Current Components
Head - MS-RA770 Apollo 4 zone (Used only 2)
Amp - a JL Audio M600/6
Speakers
Zone 1
(Cockpit area) 4x Fusion MS-FR6022 6". Two at ankle level and 2 in the arch wired in parallel and powered by 1st amp channel.
Cockpit Sub 1x JL Audio M10 10" Subwoofer on 2nd amp channel (bridged)
Zone 3 (I skipped Zone 2 for future expansion)
Cabin/V-Berth Speakers 4x (Clarion?? Original to the boat) On the 3rd amp channel
Proposed
1) Cabin and V-Berth get split off into their own zones
Powered by the existing JL Audio M600/6 Gives the Cabin and V-Berth their own zone and volume control.
2) Add Fusion Apollo 6 Channel Amp and second set of speakers in arch
Channel 1 - Powers Zone 1 4x Arch Speakers in parallel Thinking of moving the existing Fusion speaker (now obsolete) to the arch so 4x 6"
Channel 2 - Powers Zone 1 Subwoofer (Bridged) Current Sub is 250W, this amp bridged is 580. May have to upgrade.
Channel 3 - Powers Zone 2 2x Speakers (Maybe add new speakers here).
Recommendations for system layout, speakers?
Fire away!!