58 Sedan Bridge Official Thread

Discussion in 'Sport Yachts/Yachts' started by Skip, Oct 19, 2018.

  1. ranger58sb

    ranger58sb Active Member

    488
    Apr 6, 2021
    Annapolis
    2006 58DB
    MAN 900 CRM

    Some additional info here:
    http://clubsearay.com/index.php?thr...vailable-at-marine-max-brick-to-order.110932/

    Probably useful to compare to Tom's replacement approach here:
    http://clubsearay.com/index.php?thr...nd-improve-the-sea-ray-systems-monitor.91270/
    In post #9, he mention his hardware cost was about $1200.

    -Chris
     
    carterchapman likes this.
  2. swaterhouse

    swaterhouse Well-Known Member GOLD Sponsor

    Jan 7, 2015
    Mattapoisett, MA
    2008 58 DB
    MAN CRM 900
    I went with the Maretron as I knew it would last longer term. The problem is they have so much cool stuff that once you have an N2k backbone in the bilge you can easily drop another few boat bucks to monitor everything!
     
  3. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    I just l
     
  4. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    good call this happened to me as we well and I also heard of another 58db owner have his stern thruster burn up the back of his boat.
     
  5. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    Access to the side and back of the washer/dryer is from the bunk room a panel pulls off
     
  6. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
     

    Attached Files:

  7. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    Did you ever replace that fridge and if so what did you buy and would you recommend it.
     
  8. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    My fresh water pump was running for a few seconds about every minute today so I went to the manifold and shut each feed off until the pump shut off completely. It turned out that there is a leak somewhere in the water line to the kitchen sink. Despite not finding the actual leak yet has anyone else had this sort of experience and where I can access that water line. There was no leak under the sink, manifold, or pump.
     
  9. ranger58sb

    ranger58sb Active Member

    488
    Apr 6, 2021
    Annapolis
    2006 58DB
    MAN 900 CRM
    I did replace it and from what I remember the whole door frame comes out and the washer/dryer slid out easily. I bought the attached model from lowes and tipped the drivers to bring it to the hallway and I did the rest. Not a difficult replacement

    Thanks, that helps. I was a bit intimidated by the door frame...

    -Chris
     
    Robert Serviss likes this.
  10. ranger58sb

    ranger58sb Active Member

    488
    Apr 6, 2021
    Annapolis
    2006 58DB
    MAN 900 CRM
    I haven't traced the whole line, but there's an access panel to the galley faucet underneath the sink faucet. There's also a shut-off valve there for the waterline to the galley freezer's icemaker.

    There's room for a '57 Chevy back there, although I can't get my shoulders through. Looks like some of the waterline routing should be traceable, though, and then maybe you can pick up more clues at the manifold end.

    -Chris
     
    Robert Serviss likes this.
  11. carterchapman

    carterchapman Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Mar 25, 2008
    Lake Chickamauga/Marietta, GA/Ft. Myers, FL
    2006 Sea Ray 58 DB
    MAN CRM V8-900s, Twin Disc Drives; Onan 21.5 Generator
    The bridge icemaker and sink line run off that as well.
     
  12. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    That helps tremendously I bet that’s where the issue is the bridge sink might have been left on. You just saved me hours of troubleshooting thank you very much.
     
  13. carterchapman

    carterchapman Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Mar 25, 2008
    Lake Chickamauga/Marietta, GA/Ft. Myers, FL
    2006 Sea Ray 58 DB
    MAN CRM V8-900s, Twin Disc Drives; Onan 21.5 Generator
    Also, our anchor wash down has to be OFF real tight or it drips and the pump runs every 20 mins or so.

    yes I’ve had the bridge sink slightly on to cause that. Like when you dump ice in the sink and it bumps into the valve
     
    Robert Serviss likes this.
  14. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    That is exactly what happened before I left the boat I emptied the ice bin in the sink and I’m sure the faucet is open.
     
  15. carterchapman

    carterchapman Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Mar 25, 2008
    Lake Chickamauga/Marietta, GA/Ft. Myers, FL
    2006 Sea Ray 58 DB
    MAN CRM V8-900s, Twin Disc Drives; Onan 21.5 Generator
    Do you have the all–in- one “wrinkler“ unit, or a stacked unit?
     
  16. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    All in one wrinkle machine that requires steaming after the clothes come out. I never run the combo cycle I think the clothes come out less wrinkled when you wash them then add some dryer sheets and run the dryer mode separately and don’t let them over dry take the clothes out a little early and let them air dry on a hanger as it will cut down on the wrinkles which equals less time steaming. I bring my nice clothes to a wash and fold or cleaners when the wife isn’t on board.
     
  17. carterchapman

    carterchapman Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Mar 25, 2008
    Lake Chickamauga/Marietta, GA/Ft. Myers, FL
    2006 Sea Ray 58 DB
    MAN CRM V8-900s, Twin Disc Drives; Onan 21.5 Generator
    I can’t wait to look again to see if I have that removable panel in the bunk room behind the wrinkler. I swear I’ve looked before and didn’t see one.
     
  18. Robert Serviss

    Robert Serviss Member

    74
    Feb 21, 2021
    Massapequa New York
    2006 Sea Ray 58 sedan bridge Shipfaced
    2013 Sea Hunt 225 ultra lil Shipfaced
    MAN CRM 900
    If I was on the boat I’d take a pic but it’s a big access panel probably 3’x3’ held on by the same latches as the closet doors. Could be a pain in the ass lining them back up when putting back on but it’s the only way to access the back of the wrinkle unit.
     
  19. ranger58sb

    ranger58sb Active Member

    488
    Apr 6, 2021
    Annapolis
    2006 58DB
    MAN 900 CRM
    A pic would be great. Pretty sure I don't have one like that. And I'm on the boat right now, no latches in sight...

    Perhaps yours is a mod made by a previous owner? In any case, sounds nifty...

    -Chris
     
  20. missnmountains

    missnmountains Active Member

    512
    Dec 12, 2007
    Florida
    2008 58 Sedan Bridge
    900 Man
    We have the stacked and our panel is small and held in by 4 screws. Mainly to get to hoses and shut off.

    Ke
     

Share This Page

Show Sidebar