lofrans

I sheared off my clutch nut on my Lofrans project 1000 windlass. Looking to see if anyone has one they'll sell. Maybe you're parting out an old windlass or have 1 you no longer need

Hi All, I have a 2004 Sundancer 280 and the Solenoid in the Engine compartment for the Windlass "clicks" when I press the Windlass button on the helm. Tomorrow my plan is to get my multimeter down there and do some measurements. Also important to note that the foot switches on the bow also do...

I currently need a replacement finger kit (tensioning finger, post, spring, etc.) for the Lofrans Marlin windlass on my 2007 260 DA. The Marlin model was discontinued and parts are hard to come by, so any advice on where to find these parts will be greatly appreciated. Thanks!

Hi All, Just wanted to share a bit of information I searched out while working on rebuilding my windlass motor. My 330 has a Lofrans Progess 1 installed, and I was having problems getting it to work consistently. I pulled the solenoid out so and cleaned the contacts, which helped slightly...

I am rebidding the bow of the boat (spot light, scuff plate, cleat, anchor rode holder). I got everything off but the windlass. I see 4 nuts that I am sure I have to remove. All I want is access on the bow to rebed the windlass. If I remove those 4 nuts can I simply pull up the top part that...

Hi, I was having trouble with my winch and decided to buy a new pawl, "winch finger". I couldn't find one, evidently they are no longer made. So I made one in Autocad and had it printed by Shapeways which is something I was doing anyway. I teach computer graphics and modeling. So if anybody...

I'm looking to replce the warn out motor to my 2004 Lofrans 500W windlass that came with my 280 DA. For whatever reason it seems that no one sells just the electric motor...