bravo 3

  1. D

    Beeping... about one second apart 2002 240 Sundancer

    Guys I started my boat today and almost immediately the warning beeps started. it was a single beep about one second apart. I opened the engine compartment and noticed my outdrive oil (bravo 3) was low in the reserve. I added a few ounces and it was back to normal levels. I started the boat up...
  2. F

    Bravo 3 Trim stopped Working

    Hi. I have a 2007 Sundeck 260 with 8.1L and Bravo 3. The boat ran great all summer. I ran the boat for an hour and pulled the boat out on my trailer 2 weeks ago. I then, unscrewed the drain plug, and let 2-3 gallons of bilge water run out on the boat ramp. I was preparing to drain the...
  3. J

    Making new sea water pick up thru hull. Sundancer 300.. Rebuilding engine.

    Rebuilding engine - New sea water thru hull pick up.. Hi, I had a problem with my port engine, the bravo 3 sea water cooling inlet corroded and shut down the water supply. So I had to rebuild my engine, and in the same time I put fresh water cooling on the engine, and since the sea water pick...
  4. K

    Bravo III - Time to panic? Corrosion beyond repair?

    All, Purchased a 2002 24' Sundancer last fall. The previous owner did not keep the anodes fresh and unfortunately while my surveyor mentioned that the drive need to be refinished, he did not warn me to the extent of issues with these drives when not cared for. My novice $$ training. I pulled...
  5. L

    Wanted: Bravo 3 2:20

    Hi everyone, I am in search of a Bravo 3 with a 2:20 ratio. This has been quite the learning journey for me. It's pretty incredible how difficult this has been, dealing with less than ethical people, or better said walking away from less than ethical people. I check craig's list (for several...
  6. C

    Duoprops on a Bravo 3-Do they need to be "indexed"

    I was told today that there is a correct way to install the duo props on my Bravo 3 outdrives for the best horsepower, torque, and fuel efficiency. I was a little surprised but I thought I would ask. Can someone please fill me in on whether this is true or not? And if it is, what IS the correct...
  7. C

    Drive Coupler and Yoke Maintenance Question

    I removed the outdrive on my Bravo 3 Merc on my 310 Sundancer and need some help determining if I need to replace the drive coupler in the engine. My real question is, what is an acceptable wear level on the shaft splines and is it possible to replace the shaft and not the coupler on the engine...
  8. W

    350 MPI w/ Bravo III - Dramatic power drop! Please help!

    I just bought my first boat, 2003 used 220 Sundeck with 160 hrs, and when we did the water test and for the first couple trips out it was running like a dream (cruising @40mph and maxing out with 5 adults @50mph). Then about two weeks after taking ownership the old girl seems to have a...
  9. P

    Engine dies when shifting to neutral, 6.2L Bravo 3

    I was running my 2004 Sea Ray 270 Sundeck about 35mph this weekend and got a warning alarm. Checked water temp, oil gauges and all ok. Got into a no wake zone and put the boat into neutral and it died. I couldn't start it in neutral but then disengaged the transmission, throttled it up and it...
  10. K

    2 Sets of Used Bravo 3 Props - 20P - for Sale

    2 Sets of used Brovo 3 Props - 20P - for sale. New $2600 - Selling for $1300 or best reasonable offer. Quantity Part#'s 2 @ 48-823661 20P 2 @ 48-823662 20P
  11. W

    2004 Bavo 3 outdrive

    Sold sold sold Gone Gone SOLD SOLD SOLD SOLD http://longislandmarine.us/ZenPhoto/index.php?album=outdrives
  12. C

    Propper ratio Bravo 3 with 496 on 290

    I repowered my '94 290 Sundancer in 2005 from the original 454 to a Mercruiser Mag Bravo 496 (8.1L). Now I need a complete new outdrive and transom assembly also. I am not sure what the ratio of the original drive was and if it was the propper ratio for the replacement engine. I certainly want...
Back
Top