Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
I need a picture of a 97 or 98 400da. I need the area around and including the bow roller. I need to see how the contour recesses for the bow roller. Thanks in advance
Tim
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
I am doing a restoration on a 97 400 da with a serf haul and the section described is cored as well as the gunnels and lower on the sides.
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Thank you guys for the response I emailed searay and they confirmed they are 22x23
What size and price
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Hello,
I am trying to find out some info on prop size for 1997 40 sundancer. I looked on searays site but t chart did not include the 400 Da. I had a 22x23 nibral L cup it when I bought it but I want to be...
Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread
Hello, I have a 97 400da that I bought about a year and a half ago. Due to a divorce it has never been in the water since I have owned it. I'm in the process now of getting new canvas and some other things...
I checked with flounder pounder, I am trying to find one at a salvage yard with no luck yet. I may have to build it but it take several hundred hours. Its hard to believe that there are no vents available for any of these boats. Its not that old of a boat. Thanks for your help
I am looking for a vent cover for the Starboard side of my 97 400DA sundancer. The part number is 0863845. I would like to find the original supplier or better yet a used one. It is no longer available through marine max. Any help is very appreciated.
the butyl and my non moving windows is bad, I suspect that's where my leak is coming from. If you go look at it from the outside you can push the window in a little bit and see where its not sealed.
They called me from lachmillers today. He is replacing both bearings, all 4 brushes, cleaning it up and resetting the magnets. All of this for 58 bucks.
I worked on the flocking today on my 30' weekender. It took me about 10 min to take apart the port side window. After looking very closely I discovered that the main window needs resealed. With the design of the window I don't think the flocking alone would make it leak. If you are replacing...
I ended up taking it to lachmiller's at 5115 lewis yesterday. He is going to call me when he gets to it about 2 days he said. I will let you know what he says. The guy at the counter said he will be able to fix it. I was at fishers yesterday looking for some other stuff but didn't check on the...
I have a lewmar concept 0 windlass. Has anyone had any luck getting parts for the electric motor. I called lewmar and they were no help at all. They said you should just buy a new one. Im sure the motor was manufactured by someone else just not sure who. Thanks in advance
I have an 88 300 weekender and need to find new sling tags. they are the ones with the screw holes in them. i have seen these on at least 30 other boats but cant find them online anywhere. my next option is to have some lasered out but it would be much easier to just buy them.
I just bottom painted my 300weekender this weekend. I paid 250 to get it sandblasted last fall after doing some glass work i went over the whole bottom with 80 grit on a DA. I put 4 coats of interlux 2000E interprotect at 220 bucks a gallon at 1 gallon and 3 coats of interlux micron CSC at 90...
I would say fuel is our bigest expense every year. I pay 475 for dockage 275 for club membership 90 for lift fees and storage i do all my own maintenance and shrinkwraping so thats about another 300. last year we spent around 2600 on fuel and that was at around 3.80 a gallon since it only gets...