Does anyone find it difficult to board by using this ladder?
I usually throw a stern anchor the nose into the beach and set the bow anchor.
It seems much more difficult to board this way, I could return to backing up to the beach but I like the idea of the drive in deeper water.
Has...
On Friday we had some terrible weather in the Catskill NY region, we had about 7” of rain and wind in a short period of time. Large parts of trees, marinas docks breaking free and a rapid current were all factors, there were many damaged boats and according to the Sheriff’s department some sank...
I assumed that there was a tube going from the B3 to the dash to move the speedo.
When i took the dash off I found 2 wiring harnesses. One came from the center gages (trim, oil pressure, etc) the other unplugged.
I didnt see a place to plug it in, any ideas where to start to find the problem...
Since a 220 has very little storage space I am wondering other than getting another anchor and storing it under the seat has anyone used the other sand anchoring devices?
Usually I tie off to a tree but not always available
Thanks
Jack
It is getting close to that time to purchase shrink wrap. I usually buy a roll that last for a few years, wondering where you DIY guys buy your wrap?
This is where i got mine last time
http://www.boatshrink.com/
Thanks
When I have my boat winterized they shrink wrap the outdrive in the up position. I understand this isn't the ideal way to store it for the winter. How do you handle this?
Thanks
Jack
Does anyone use these. I seems that when I load my boat the stern is not level. It takes several attemps to get it stright.
Thanks
http://www.overtons.com/modperl/product/details.cgi?i=25025&pdesc=ShoreLandr_Deluxe_Bunk_Load_Guides_white&str=trailer%20guides&merchID=1008&r=view
Since I purchased by boat my horn fills up with water. I am tired of removing it dumping it out. I driled a drain hole but that didn't work either. Has anyone else had this problem? Is there a direct replacement horn?
Thanks for your help
Jack
Just put the boat in the water today and I am not all the Sirius channels. The raido won't update. They told me to factory reset it. Does anyone know how
Thanks
Jack
My outdrive has some corrosion. I am going to replace the anodes. which type should I use Zinc, Magnesium or Aluminum?
I am only in fresh water
Thanks
Jack
I am going to purchase a PC7424. Can someone recommend which pads to buy.
I have a few spots with light oxidation. Mainly need to clean and wax.
Thanks
Jack
I shrink wrap my boat, since most of the boat is covered by the wrap and of course it get cleaned and waxed in the spring what do you recomend for winter cleaning.
Thanks
Jack
http://www.dailyfreeman.com/site/news.cfm?newsid=18664412&BRD=1769&PAG=461&dept_id=74969&rfi=6
Contrary to the story I hear they just finished Fueling up
My snaps keep pulling off my bow cover ( not off the boat). I have brought them back to my dealer a few time to have them replaced.
My dealer is an hour away from home.
Is there something I can buy to replace them? Is it difficult to do?
Thanks
Jack
I have always kept my overdirve off when towing on long or short trips . A freind of my said he towed using the overdrive.
Can you let me know what you guys do?
2003 Expedition, 2000 Dodge Ram 1500
Thanks
Jack