Boat Name Location 220 SD
- Thread starter jacktm
- Start date
- Oct 3, 2006
- 1,985
- Boat Info
- 2004 - 220 Sundeck
- Engines
- 5.0L w/Bravo 3 Drive
SearayPaul
Active Member
Putting decals is an easy DIY job. Find your space and check for fit and centering. Mark the center. Next put a couple drops of dishwashing soap in a pint of water with a sprayer.
Spray the boat well and the decal. Apply the decal where you want it. You just need to be close as long as the boat and decal are wet. Align your decal with your centering marks and then squeeze out the air bubbles. Pull off the protective layer and you are done.
Spray the boat well and the decal. Apply the decal where you want it. You just need to be close as long as the boat and decal are wet. Align your decal with your centering marks and then squeeze out the air bubbles. Pull off the protective layer and you are done.
- Oct 3, 2006
- 1,985
- Boat Info
- 2004 - 220 Sundeck
- Engines
- 5.0L w/Bravo 3 Drive
No, it was not a DIY job for me. :grin: Not that coordinated to do that. Had professionally done by local sign shop. Lady that did the letters also did my numbers on bow. Did a nice job for $50.00 bucks. :thumbsup:
