Hello CSR members,
I want to tell a story about the power of CSR.
Found out that one PART of the fresh water manifold was leaking water.
I could not buy this part in all Europe, and then found a post where a USA member with the same problem wrote that also Marine max did not sell this anymore...
Hello, I want to change my duck bills.
Does someone can tell me witch steps I take, and in witch order.
The picture looks clear, but in practice the space between parts is very little.
Also I don't see how I can take pieces out when it's mounted...
Thanks for your help.
Peter.
I noticed that I had some water in my bilge.
Normally it's dry, so I started looking.
My starboard shaft seal from Sureseal was dripping.
I have a extra seal in a carrier.
Now I need some tips how to get the best result out of this extra seal.
I know that Frank W has his thoughts about this...
http://www.bootveiling.com/?pageAlias=aanbod_specs&curId=108&PHPSESSID=395efccb3b706a990f5f14c1f9fd2c0b
I go tomorrow and make a offer...
Maybe got a second boat.....
Sorry it's a 480SB no DB, but you can't edit the title.
Peter.
As some of you know, I serviced my raw water system this winter.
I was really shocked when I noticed that some of my hoses where in a pretty bad shape!
You can't see it very good when the hoses are fitted.
See this photo, nothing seems wrong...
But this is what you see when I bent the...
Ok we can’t all make a book….
But if you did some project(s) on your boat we can post them here.
And of course with photos it’s much nicer.
Here’s one of my winter service projects.
I wanted to service the raw water system of my Yanmar’s.
So I dismantled the raw water pumps, changed the...
Hello,
My starboard fuel meter shows a incorrect level of diesel when the tank is full.
When I know for sure the tank is complete full the meter shows only three-quarter full.
The meter stays 1/4 behind, only when the tanks are almost empty the level on both meters is almost the same.
Does...
Because my children getting bigger, I placed a custom made mattress in the mid stateroom.
I also made some extra space, by putting a self made board on the side.
Size is now 82 inch X 62 inch.
Here are some photo's.
Hello,
I want to remove my standard TV in the forward stateroom.
Removed the two screw's in the wooden ground plate.
But I still can't get the TV out.
Somebody got a idea?
Peter
I have a question.
I noticed some water under the AC unit, is that normal?
And if so, how many is normal or is that depending on operation time?
Thanks for your input.
Peter
Sealand come up with new motor upgrade that make your Vacuflush sanitation better:
Creates 50% less sound than previous motors, makes for a much quieter operation.
Flexible Coupling - isolates motor from drive shaft to eliminate "knock".
Industrial Grade Gears - precision machined gearing...
What kind of maintenance does a stuffing box need?
Or do you only need to take some actions if they leak?
And how do you tread a leak?
My boxes are fine but I like to know.
Peter
Hello,
Booked the flight to San Francisco last night.
Me and my family (2 children from 11 and 9) coming to CA from 23 April till the 14th of May.
For me and my wife it's the 4th time we go to the USA 2x CA and 2 X Florida.
Hope you USA guys can give me some great tips and info.
Are there...
$38K for this boat??
http://digiads.com.au/boats-watercraft/used-boats/USED--SEA%20RAY-SUNDANCER-CRUISER-BOAT-FORSALE-PEWAUKEE-TAS-53072.htm
Who wanna buy this boat for me :smt101
Peter.
Hello,
Thinking about, making my own fuel polish system.
Very simple with a electric fuel pump and T handles.
Planning to place the fuel pump in the fuel line after the racor's.
See my drawing.
Any comments?
Hello Searay friends,
At this moment I am 40!!
I love my life, and the most important in my life is my family.
Just want to say, that a Sea Ray in your life gives a lot of fun together with your family.
So, enjoy your life!!
Peter
I took my 360DA out of the water to give her new anti fouling.
Also I take off the striping and letters, because they where damaged.
After that I polished and waxed the hull.
Also mounted some new anodes.
Here you see some photo’s