Search results

What's the cost of these new switch modules?

How did the paint job turn out on your switch cover? I have two small pieces broken out of mine and deciding if it's worthwhile to have the black one that came with my new switch pad painted.

When I first bought my boat I called Kohler and if you provide your serial number they can tell you if they have a sound shield available for your genset. I never followed up as decided it wasn't really an issue me and from reading how difficult it makes maintenance it didn't seem worth while...

Looks great and impressive workmanship, very nice upgrade for a 340.

Finally went down and measured mine, 5 11/16 X 5 in case anyone needs to know at some point in the future.

Anyone happen to know what size the clamshell vent covers are on port side for the exhaust fan? Found them on ebay in two sizes, Small 5-11/16 X 5 and Medium 7-3/8 X 6-5/8.

I bought mine from http://www.comfortcustombedding.com/ They have the template already for our era 340 and it fit perfect, it was $1,400 two years ago including shipping. I have a 6" innerspring with 2" of foam on top, two densities with the topmost inch being memory foam. They are located in...

Need the king to reach out to the widest part of the berth. Be careful going to thick on the foam, it' makes getting in and out of the bed difficult. After about 4 years of dealing with a 4" memory topper I bought a custom innerspring mattress two years ago, best money I've spent on the boat...

2004 340 Sundancer Toast canvas set. Was used on boat 5 seasons so has some wear, been sitting in storage last 5 years, cool and dry. Front and rear bimini tops, vinyl coating inside has started to break down. 3 front isinglass panels, 2 side isinglass panels in good shape, back drop curtain...

I like that plug wire puller you have, I need to find one like that.

Plugs were replaced in April so I think I'm good now that I'm running on 8 cylinders. :) According to Smartcraft I'm burning 1 gph more on starboard but I always have, when I fill after a straight run with no genny I take very close to the same on both sides, so not sure why starboard always...

Quick update on my increase fuel burn on one engine, had a spark plug wire off from some work done earlier in the season. So was indeed as several members have indicated, these 8.1s will run remarkably well on less than 8 cylinders, my telltale signs were fuel burn which got my attention, 25%...

Great, thanks so much!

Hey guys, I'm chasing an increase in fuel burn on my starboard engine the past month. 8.1s, I did new AC 41-983 plugs in May, but after reading this and several other post going to swap out for a new set, cheap and easy first step. I may try the Champions even though been running the ACs for...

I keep my spare parts and all my tools in my cabin forward in sole storage compartment. I keep my sockets and wrenches in separate soft side bags and one plastic think what they call a pickup truck under seat-box, long and low profile, for everything else. Works pretty well.

I tried a slide on davit system for one year and it was too high to load even with a really light rig, air floor dink and 2 stroke motor. I took the plunge and put a Sea Lift hydraulic platform lift on, best thing I could ever have done to this boat, I love it. I use my dink every weekend and...

The plastic mesh screen/filter described above is the only one on my unit, slide it out, vacuum it clean and slide it back in.

Thanks for the confirmation, from the picture I was pretty sure but wanted to be positive before I ordered. Tesco is the best price I found as well. I know how mine gets wet, when the hatch is down the cockpit shower box is directly overhead and it drips right onto the pump, I only finally...

I'm looking for confirmation that a AC-3CP-MD is the correct pump on an 04 340, I assume the same pump was used on other years as well but would feel better having confirmation before ordering. If any other 03-08 340 guys out here happen to know, feedback appreciated.

I have the same issue, while cleaning my bilge noticed the mount is all but rusted away and the pump is more or less sitting there held in place by the hoses. Did you find the model number for the pump that you need, should be the same as me, I'm an 04 340. An AC-3CP-MD is the first one that...