Hello,
I need to replace a burnt out led backlight on my AC distribution panel. Does anyone know a source for this repair or replacement? This is on a 2000 510 DA.
Thank you
I am stumped chasing down the back lighting issue for my helm gauges. They worked last summer for the previous owner, but now they don't come on. (None of them!) If it was 1 or 2, I would blame the gauges, but since they have all gone down, I am thinking it's something else.
I thought it might...
Hi all,
I have been searching without luck to find a new heating element for the above referenced water heater on my 2000, 510 Dancer. Technically the heater is working fine, but it is 23 years old and who knows if/when the element has ever been replaced. I am currently doing a salon floor...
Hey CSR, I need some help if possible. I made my regular check of the sump area and noticed I had water on the deck in there. Not a lot but enough to need the vacuum to suck it all up easily. Maybe about a pint or so?? Anyway, as I was searching for the culprit I saw that the bottom pex feed on...
Hopefully someone can share some advice.
2000, 510 Sundancer with a GHS platform lift.
Until yesterday it was working fine. When we put it done yesterday the port side locking plate didn't release all the way and it caught the "stud" it locks to as it was going down. A sort of nasty noise to...
Does anyone know where I might be able to find this cockpit return air grill? It fits the 510 and 540/550 configuration. I know it is probably a long shot, but thought I might as well ask.
TIA
Finally received the new latch and got it installed...This looks so much better than the plastic Perko!!! The old one was getting cracked and just didn't look good. Why replace it with another plastic one when SS looks so much better// LOL
Just needed a little bit of sanding for the new latch...
For all of the boaters that have to put their "babies" into hibernation for the winter, my friend came up with a solution to keep her on your mind all winter! To that end, I hung it on the wall under my clock in the nook so that I know it is "BOAT time" all year long!
If you would like one of...
I finally came up with the solution for the ugly plastic slide bolt receiver on my transom. It looks so much better than the plastic one. It was cut as an aluminum piece to replace it. Sometimes its the little things that make us happy!! :)
Hi All,
Just been having fun the past couple years upgrading the 460 we own. Rather than post a ton of pics...I have a Shutterfly site that shows everything...some fun stuff and some boring stuff, nonetheless a bunch of upgrades that were easy to do. (except for the recent trim...
I want to give a shout out to Marine Parts Epress and the owner JD.
As some of you know I have had the EDC issue for some time now, hopefully the solution is on board and will be dialed in early January. As part of the process I had connected with Marine Parts Express and ordered a new...
Hi Guys,
I know not many of you have the VP Engines on a 460 from 1999, but I thought I would ask here anyway.
I have the TAMD73P-A engines and the EDC control unit took a dump 2 weeks ago. According to Volvo, they have phased out this part #3826995, and the new part won't be available until...
Hi Folks,
I am replacing my berber cockpit carpet with new Aquaweave and want to send the old crapet to a good home as opposed to a landfill. I live in northern Michigan and the carpet has only seen 2 summers so it is in excellent condition. Made by Custom Marine Carpet it is the dunes berber...
Hey Gang,
I am going to remodel my canvas on my new to me 1999, 460 DA and would like to offer for sale the exisiting. The canvas that is on it (Black) has only seen 2 summers (16 & 17) in northern Michigan, as it was new in the winter of 15/16.
The entire system included from the arch back is...
I am in need/search of the swim ladder "locks" for a 1996 Sea Ray 370 swim ladder. The ladder slides under the platform and at the rear of the ladder mount are 2 plastic parts that lock the ladder back...essentially a stepped ridge that the ladder posts droop in to to keep if from extending...
Hi Guys & Gals,
On my 370 Dancer I have learned that ALL DC components are connected through the port battery bank. If I turn off the port battery switch NOTHING on the boat that is DC will operate. Does this seem strange or is this normal?
Configuration:
3 battery banks
Port bank has 2...
I have a 1996 Promariner 30 amp 3 bank charger for sale if anybody is interested. It is completely functional and ready to install. Great condition! Message me if interested.....$50 plus shipping.
Hey there CSR members,
Well, it's time to replace my 1996 Promariner 30amp charger with a more up to date "smart" charger. I am going with the pro nautic 1250P, 3 bank charger at the recommendation of pronautic. I have 5 batteries on board my 1996 370 Sundancer. All deep cycle, single bank for...
Hey Everyone,
I just replaced my black control knobs with chrome handles but I am selling my existing black knobs if anyone wants them. They are in great shape. The "T" caps are slightly sun faded but overall they look great. They are listed at E bay here...
Can anyone share what the best drill bit is to use when drilling through the transom of a 1996, 370 Sundancer? I need to drill a 1" hole through the transom for the transducer connection....How thick is the hull if anyone knows..
Also; type of bit
Spade?
Auger Type?
Hole saw?
I have drilled...