Dinghy Davits
I am selling a pair of Dinghy Davits that were custom made for our 2006 Sea Ray 340. They fit into the Weaver receiver davit which was mounted on the swim platform. Allows you to leave the dinghy flat without removing the motor. Will fit many other models. Made of Stainless and...
2006 Sea ray 340 rear canvas. Fits models with poles for canvas.
https://www.facebook.com/marketplace/item/467194150586635/
Make an offer plus shipping...
While pulling up the anchor today after an awesome 3 day trip the jaw/jaw swivel broke and dropped the anchor to the bottom of the ocean. Looks like a common problem from what I have read on some posts. I am happier it snapped when it did rather than during the night on anchor somewhere. I am...
I am looking for picts or ideas on replacing the NS100 VHF radio, the cord is cracked. I have a backup handheld but would like a permanent fix. I have done some research and know I can replace it with the ICOM M400 ($300) prob the easiest change, however the Standard Horizon radios have more...
Went to power up the C80 for the first time this year that worked flawless last year and will not power up. Tested the power at the cord going into unit and has 12v. Contacted Raymarine and they no longer service this unit. Great!! This definitely was not on my list to replace the electronics...
Hi all,
I went to finish up cleaning the bilge after winterizing last week and could not get the engine hatch to lift. absolutely nothing !!!I have never had a problem with this prior to. I checked the transom door switch and does not appear to be that. I pulled the pins and got the hatch up...
While winterizing I noticed my coolant reservoir tank was low. I refilled it and overnight I lost the coolant I added. I checked the end cap of the heat exchanger on the raw water side and located my missing coolant. So there is obviously a crack or break inside the exchanger on the coolant side...
I have a kohler 5e which is running as usual but I am getting no power to the panel. It is as if the breaker on the generator tripped but I have checked it and reset it several times. I am not getting any lights on the panel to show power but the generatir is running fine. It was running fine...
I just finished changing the manifolds on our 06, 8.1's. I thought I would be thorough and ordered new Oem manifold bolts. The new bolts came stainless steel with no collar. The old bolts were steel with a collar, original as they still had the black paint and never been changed. All removed...
During winterization I noticed a small stain in my bilge which is coming from the underneath/front of my port side sea water pump. indicative and very similar to another thread which indicates it is shaft seal, I don't want to bother rebuilding the pump at this time as it is already 7 years old...
Is any one familiar with the air pump fittings on the raw water pump for a 8.1 merc . I was looking to remove the pump to change the impeller. I pulled back the sleeve from the collar but the small air hose is still in the fitting tight. I don't want to break the fitting so any suggestions would...
I am looking to add a spotlight to our 06 340. Not sure why it doesn't have one, however We travel alot at night and a spotlight needs to be added. I am looking at the golight hid, chrome, remote.
However, Does anyone know if the 340 was prewired for a spotlight? I have looked in the anchor...
Our 06 340 has the optional factory laminate wood flooring in an area in front of the galley and on the stairs. Looking for ideas what to use to clean and protect this flooring. I have been told many of today's cleaning products will ruin the floors finish. Any help would be appreciated.
Jason
I just would like to pass on this info if anyone is having similar problems!!
I have a 06 sea ray 340 with a coolmatic RPD-0110U in the downstairs galley. The fridge would cool great and work as it should under shore power. However On 12Volts the fridge would not get cold. You could here the...
I have a 06 340 with 200 hrs and experience a slight clunk when I shift into forward or reverse gear from both transmissions. I spoke with a mechanic who stated not to worry some v drives do this. Is any one else experiencing this. I am going to change the tranny fluid and filters and all the...