Source for stainless steel engine vents

Jason
I will be able to make these at the same price as the others in this complete order of over 25 units(collectively between you guys) @ $95 ea + shipping.
 
Nehalennia said:
Hi Wilytemptress.
I will be able to offer them again, but only if I can get an order of 25 or more will they be in this price range. If you need only 6 and others don't want to order with you, they will be closer to $199, not the $95 + shipping in this quantity.
Click to expand...


Got it thanks. I am going to the boat next weekend. (March 2nd) When is deadline for ordering?
 
wilytemptress said:
Got it thanks. I am going to the boat next weekend. (March 2nd) When is deadline for ordering?
Click to expand...

I will be ordering these tomorrow, but there is a 3-4 week lead time so get me your info/order as soon as you can and I'll try to add them on this order.
 
I'm really confused now as the 390 guys have split between the two sizes with Pietro getting the smaller size and skillz getting the larger. I want 6 of whatever a 390 should have which I think is the smaller 4 5/8th
 
docofthebay said:
Yes I'll be at the boat Saturday. If thats too late I'll go with Pietro. Off not I'll measure Saturday and post here then
Click to expand...

Just let me know. Send me a PM with all of your contact info, and I'll update the order when you get back to me.
 
Doc, I have substituted the original ones with those you can see in my post #8. They fit nicely with a different screw pattern. So the 4 5/8" should be fine.

Don't you have the 3 vent that are a little apart form each other?
 
Pietro
Keep in mind that the vents on the '84 390EC that I looked at on Monday were the wider(5 5/8")vents. You're boat being newer like Richard's may be when they switched to the narrower vents (4 5/8").
 
Just got back from my boat. Mine were 14 x 5 5/8, the larger of the two choices. Mine were spaced apart like Pietro's but are the larger size.
So.... Gimme 6 of the 5 5/8 inch tall ones
Thanks for all you are doing and for putting up with us as we wander around.
 
Todd, just ot be super sure... could you please confirm the size of the cut-out.

The 4 5/8 are slightly smaller than the 4 3/4 I have now. So if cut-out is ok, I may chose the larger ones.

Thank you!!!!
 
Pietro
You want to know the cut out of the larger ones? I don't have my notes with me here right now, but I believe it was 3 5/8" x 12 1/8" for the larger ones.

Here is the drawing again for the 4 5/8"s ones
59ca8786.jpg
 
If the larger ones are really 3 5/8" x 12 1/8" then these are the ones I really need! That is exactly the cut out I have on the hull!

I'm sorry for the confusion, but I changed the original ones many years ago and fitted the ones in my first post.

Now I'm convinced I need the 14 x 5 5/8 granted the cut-out is actually 3 5/8" x 12 1/8".


Doc, just curious, are you taking them in white?
 
Ok Pietro. I'll make sure that's it. And you're looking for 6 correct?
 
You must log in or register to reply here.

Forum statistics

Threads
113,172
Messages
1,427,846
Members
61,086
Latest member
MrWebster
Back
Top