- Nov 4, 2019
- 2,487
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
We are in Woodbury. The boat is in lindenhurst
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I just did the X2's and love them. I Also added the POCO controller and love it. The problem is, I have 6 X2's and the draw is 5Amps per light at 12v. I put 2 X2's on a single POCO channel so it took up 3 channels and I have 3 zones. Did you get the Full Spectrum?View attachment 96497 View attachment 96497 How long have you owned your boat? Any issues with pods. I did both steering actuators in the last two years. New View attachment 96496 Upgraded units with 14mm hardware. Finishing up installing Lumitec sea blaze typhoons. 10,000 lumens each.They draw 10 Amps each. Heavy load for leds...
View attachment 96497 View attachment 96497 How long have you owned your boat? Any issues with pods. I did both steering actuators in the last two years. New View attachment 96496 Upgraded units with 14mm hardware. Finishing up installing Lumitec sea blaze typhoons. 10,000 lumens each.They draw 10 Amps each. Heavy load for leds...
No, been looking at that but might go to the Onan digital panel and avoid all the converting... Not sure yet.Ocgrant. Did You install a Maretron converter. I did. Worked well. Only info I can’t get are genset hrs.
Nice work... looks clean and simple to trouble-shoot.View attachment 96539 Nice job. I’ve been spying on you guys for a while now. Thought it was time to jump in. I ran # six wire from battery to a 50 amp breaker on bulk head then back to a 4 fused bus bar with a 10 amp fuse in each exiting with 4 10 gauge feeds to hots on lights. Returned with 6 wire back to battery. I chose not to go with full spectrum. White and Blue is all I wanted. View attachment 96538
Funny...Shaps took the words out of my mouth...Outstanding work!Done!!! Super happy... Now I need to program everything.
View attachment 96527 View attachment 96528 View attachment 96529
That really looks good congratulations on the new installDone!!! Super happy... Now I need to program everything.
View attachment 96527 View attachment 96528 View attachment 96529