48 DA Owners Club

We are in Woodbury. The boat is in lindenhurst
 
205FC7DB-B2F3-4D16-B76E-61A6283FE89E.jpeg
205FC7DB-B2F3-4D16-B76E-61A6283FE89E.jpeg
How long have you owned your boat? Any issues with pods. I did both steering actuators in the last two years. New
A65944E1-B170-4FC4-9F9B-688D9895D52F.jpeg
Upgraded units with 14mm hardware. Finishing up installing Lumitec sea blaze typhoons. 10,000 lumens each.They draw 10 Amps each. Heavy load for leds...
 
Aml327 said:
View attachment 96497 View attachment 96497 How long have you owned your boat? Any issues with pods. I did both steering actuators in the last two years. New View attachment 96496 Upgraded units with 14mm hardware. Finishing up installing Lumitec sea blaze typhoons. 10,000 lumens each.They draw 10 Amps each. Heavy load for leds...
Click to expand...
I just did the X2's and love them. I Also added the POCO controller and love it. The problem is, I have 6 X2's and the draw is 5Amps per light at 12v. I put 2 X2's on a single POCO channel so it took up 3 channels and I have 3 zones. Did you get the Full Spectrum?
 
Aml327 said:
View attachment 96497 View attachment 96497 How long have you owned your boat? Any issues with pods. I did both steering actuators in the last two years. New View attachment 96496 Upgraded units with 14mm hardware. Finishing up installing Lumitec sea blaze typhoons. 10,000 lumens each.They draw 10 Amps each. Heavy load for leds...
Click to expand...

You're literally in my backyard!

I bought the boat early last year. PO had deferred pod maintenance and I negotiated accordingly.
I did have to do a steering actuator and did the other side as a precaution.
The only thing that I was surprised I had to do was the trim actuator. I thought I would at least get a season out of them, but I didn't.
 
@Aml327
How long have you had yours?
Curious who does your pod service?
 
91397C2F-D9AB-48E2-966C-77A2B26C3A90.jpeg
Nice job. I’ve been spying on you guys for a while now. Thought it was time to jump in. I ran # six wire from battery to a 50 amp breaker on bulk head then back to a 4 fused bus bar with a 10 amp fuse in each exiting with 4 10 gauge feeds to hots on lights. Returned with 6 wire back to battery. I chose not to go with full spectrum. White and Blue is all I wanted.
36402724-2775-4DE0-BC40-616136010715.jpeg
 
Ocgrant. Did You install a Maretron converter. I did. Worked well. Only info I can’t get are genset hrs.
 
4AAF4EEE-3D21-4E5B-BAD8-C1A4325CE13B.jpeg
E26746F4-DC9A-45AB-8103-1076DCD777A7.jpeg
Shaps. I do all my own work. I’ve self educated with the factory service manual.
33ED620A-79E3-48FC-A51D-3ED8E50E9624.jpeg
 

Attachments

  • 5A17E293-B383-442F-A144-55AF003605E6.jpeg
    5A17E293-B383-442F-A144-55AF003605E6.jpeg
    146.7 KB · Views: 85
Aml327 said:
View attachment 96539 Nice job. I’ve been spying on you guys for a while now. Thought it was time to jump in. I ran # six wire from battery to a 50 amp breaker on bulk head then back to a 4 fused bus bar with a 10 amp fuse in each exiting with 4 10 gauge feeds to hots on lights. Returned with 6 wire back to battery. I chose not to go with full spectrum. White and Blue is all I wanted. View attachment 96538
Click to expand...
Nice work... looks clean and simple to trouble-shoot.
 
Sea ray cuts this jumper. Reconnect and install Maretron. I get all data on all screens.
 
Might have to cut one of the others. It was 2 yrs ago. I’ll look back on my notes.
 
You must log in or register to reply here.

Forum statistics

Threads
113,172
Messages
1,427,867
Members
61,086
Latest member
MrWebster
Back
Top