420 DA Thread

I just spent the time to look up the last part I bought when the fridge died. It was for the 12v side $359. The fridge was dead at the dock….. so I never had 110v

21200044-BD00-4C58-AE1E-003D07E5E6F7.jpeg
 
Hey Blueone. I splashed yesterday and once I got in my slip started looking over things. Here’s a pic of my Lofrans. Please share any tips. I said a few choice words when I saw this.
 

Attachments

  • IMG_0156.jpeg
    IMG_0156.jpeg
    2.6 MB · Views: 25
Hey Blueone. I splashed yesterday and once I got in my slip started looking over things. Here’s a pic of my Lofrans. Please share any tips. I said a few choice words when I saw this.
Don’t use up all your choice words before you start….. you’ll need them

I put a lot of I think liquid wrench down there and left it for a couple days. Then I bought a long punch and tapped it with a hammer clockwise…. The stainless is soft so the punch will imbed. It’s a really slow process …. Your other option is to drill it out or drill it and right hand tap the hole out with a bottoming tap.
I looked there are no right hand ez outs
If you go up in the thread the replacement bolt source is listed and the price
Sorry to hear your pain very bad design
 
Don’t use up all your choice words before you start….. you’ll need them

I put a lot of I think liquid wrench down there and left it for a couple days. Then I bought a long punch and tapped it with a hammer clockwise…. The stainless is soft so the punch will imbed. It’s a really slow process …. Your other option is to drill it out or drill it and right hand tap the hole out with a bottoming tap.
I looked there are no right hand ez outs
If you go up in the thread the replacement bolt source is listed and the price
Sorry to hear your pain very bad design
. Thanks for the tips. Just ordered the $161 nut. They sure must be proud of it at that price.
 

Forum statistics

Threads
113,197
Messages
1,428,328
Members
61,103
Latest member
Navymustng
Back
Top