sundancer 280

Hi All, I have a 2004 Sundancer 280 and the Solenoid in the Engine compartment for the Windlass "clicks" when I press the Windlass button on the helm. Tomorrow my plan is to get my multimeter down there and do some measurements. Also important to note that the foot switches on the bow also do...

I am looking at a 2006 Sundancer 280 with twin 4.3 mpi's / alpha gen 2's. The boat needs complete maintenance work (manifolds, risers, tune up, impellers, bellows, ect...) as its been on the hard for a few years after a divorce. I got the guy down to $25,000.00 but the real issue I see is...

I'm purchasing a 280 Sundancer and the port engine starts fine but the starboard engine seems to be having some issues. When you move Port engine switch to first position,you hear a pump in bilge.. When you move Starboard engine switch to first position, not buzzer/alarm no pump sound.. Engine...

I have a 2004 280 Sundancer under contract to purchase in Texas. I need Trailer Set-Up Specs for the bunks on a tri-axle trailer I am having made to trailer boat back home to Arizona. Trailer Manufacturer needs: Outer Chine Approx. Rise of Boat. If anyone has trailer set-up information, it...

Hi All! I'm going to look at a sundancer 280 with build year: 1989 i have no experience with polyester/fibreglass motorboats so i could use some advise because i have no idea what i should be looking for when i'm going over for a test ride. asking price is around 16.000 USD and yes, the boat...

I'm new to the forum and considering purchasing a Sundancer 280 for coastal cruising in New England waters. I'd be interested in hearing from other 280 owners as to its seakeeping abilities. How is she on a beam sea, how tender, does she ride dry, etc? I'm an experienced helmsman and know how to...

hi- I just bought a 2008 Sundancer 280 with Twin 5.0's. I'm awaiting delivery as the dealer is going through the boat now. Does anyone have experience with installing a generator on the 280? I have the spot for the generator. There's plenty of room for it. Is it worth it installing? Does an...

Looking to finally add a name to my 'Dancer 280. The boat is all wrapped up and plowed in with snow. Does anyone know the dimensions across the stern/transom? I think I will go all the way across and ignore the hatch cover issue. (Feel free to comment on that choice.) I don't want the name to be...

03 Sundancer 280 single merc 454 Been searching for a keypad circuit board and no one seems to have one, any ideas?