Hi guys:
im new to the page and new to searay's. I got a sundancer 260DA, got the boat around 5 months ago with out a bimini top. I have tried to order online with no luck also tried to hire 2 different local guys to have one made and nothing. Let's just say im really out of luck on this one. I...
I'd like to replace the radio in my '03 260da. It has the stock Clarion, and I'd like to replace it with something that's compatible with bluetooth.
Are there any guides to replacing the radio? Wiring schematics? Is this something a somewhat handy person can do on his own, or is it more...
What do people out there use for bedding in their v-berth bed? The few times we have stayed on board, we have just thrown blankets down over the stock cushions and it's been alright, manageable for a few nights. But i'm curious if anyone uses sheets, or has custom made sheets or uses mattress...
Hello all,
I've seen this topic thrown around a bit but have never heard any definitive answer. I typically cruise my 2002 260 DA around 3500-3700 RPM. In calm conditions and little to no current, the built in speedo reads about 28-30mph while the GPS unit reads 20-24mph. To me the speed of ~28...
Hi all,
Just entered a verbal agreement on a 2002 260DA, pending a mechanical inspection on the engine. I've been around boats my whole life, outboards years ago and most recently wakeboard boats. Havn't been much of an engine guy up until now, but really hoping to learn some basics and be to...
I currently need a replacement finger kit (tensioning finger, post, spring, etc.) for the Lofrans Marlin windlass on my 2007 260 DA.
The Marlin model was discontinued and parts are hard to come by, so any advice on where to find these parts will be greatly appreciated.
Thanks!
Looking to upgrade to 300 DA is the reason for the sale.
Pictures from Survey use password 2197
https://thomasjferguson.zenfolio.com/p788272704?fbclid=IwAR2MFhRmfPKfTEKP4xJCJuTKvpdE3z_Ob1GzbIpB1HIllTyDQEa2moQy6N4
I am selling a 2004 Sea Ray Sundancer 260
Engine is 350 Mag with 400 hours...
Hey folks,
I have a 'new to me' 2000 260DA. Finally got a Sundancer. I purchased it last Spring and noticed about mid Summer that the steering would be really stiff when I first start out. It gets a LOT easier (normal) once everything warms up. Any ideas on what would cause that? I...
Hi guys,
So my 260 DA (http://www.castoffyachtsales.com/boats-for-sale/2004-sea-ray-260-sundancer-forked-river-new-jersey-6811374/) has a 10% deposit on it and is awaiting sea trial and survey to be done this week by the buyer.
I am on the market looking into 300 DA or 310 2004 and up no...
2004 sea ray sundancer 260 with a 350 MAG engine and a Bravo 3 outdrive
Yesterday i went for a ride was out on the bay anchored all day no issues on the way back i was around 4200 rpms and 28kts and all of a sudden i heard the alarm go off. it was 1 beep every 1 min.
The boat still had power...
Looking for a Cockpit Cover for a 2005 Sea Ray 260 Sundancer. I currently have the full canvas tent cover but it is a pain in the butt to take off and put back on. Please let me know what you got.
Located in Grosse Pointe, Michigan
Thank you
Help needed - 2006 260DA, water in bilge (pics attached)
Hi Guys,
This is my first post but I've been reading this great forum for a while.
I got the boat in April, after a few day out with it I saw that there was always ware entering the bilge from the place that I have indicated in the...
I am mounting the 4g radar on my 2007 260DA. Wanted opinions if i need a down angle wedge to provide proper angle of radar when at cruise speeds. It will be mounted on factory installed radar arch. I will be using the radar mostly for close range obstacle avoidance.
Thanks for any opinions.
John
Hello All,
I m stumped and hoping that some of you can shed some light on an issue that I am having. I took my boat out a couple of weeks ago and ran fine. I did notice that when I started it up at the dock, it seemed a bit sluggish. Sounded like the carb had something in it. In any case, I...
Hello all, i am about to drill into my clean transom to install the chartplotter unit i just purchased. i plan on predrilling screw holes and filling with 4200. the wire will pass through just below swim platform and needs a 1" hole which will also be filled with 4200 after wire is secure. Is...
Hi,
I just bought a 260DA from 1998, with a factory standard depth transducer but no head unit. Can anyone let me know any example makes / models of digital depth sounder which are compatible with the transducer (or even what type of transducer they installed back then).
Many thanks
DC
Hello,
Purchased my 2004 Sea Ray 260 Sundancer in January and now really enjoying the ride after some months of transition, tune-ups, detailing and repairs.
Does anyone know where I can go to get and anchor roller for a 2004 Sundancer 260? the part nimber in my manual is
1197938 DAVIT, ANCHOR W/ROLLER 260DA-99.
I would love to get some information about installing a windlass.