Search results

i finally got the new reed for the siphon break on the kohler genny. after replacement there is still water firing into the bilge. opened the siphon break and find the reed inverted and stuck to the top of the siphon.tried again but same thing. 8.1hrs on the genny no fault codes...

i have an 06 sea ray 290 that came with a kohler gas genny. i have used it very little and has 8.1 hrs if im reading the display correctly. i decided to start it and opened up the engine hatch to find a clear 3/8" hose that comes from the 2 larger hoses under full discharge into my bilge. that...

i have a 2006 290 sundancer.using the rear shower then had a sudden failure of the fresh water pump.tank is full but cannot find a fuse other than the on/off breaker at the main panel.downstairs there is a plug that connects the 12v to the pump but that seems fine. this is a shur-flo 2.8 gallon...

when i start my boat, the port engine starts and sounds like a typical engine.the starboard engine has a growl thats hard to describe.it was always there but lately i have noticed it more.could this be related to the tilt of the sterndrive or the power steering? there is also a noise when the...

i currently have an 06 290 sundancer. i installed a c80 plotter with gps and left extra strings from the arch to the panel. my question is because of the forward arch design do i need a bracket or mount for the radar.i want to use the 18" dome and my glomax antennae is currently in the middle of...

i have a 06 290 sundancer. i am the second owner and found out recently that the guage lights are not on. when the engines are first started, the lights come on for 2 seconds and then go out. when i turn the nav lites on the compass lite as well as the nav and anchor lites come on but no...

i am installing a c80 chartplotter on a 06 290 sundancer. any tips on getting the wires from the arch to the helm?i have an access point (cover) that removes from underside of arch but the rest i got to find a way.i was also going to use a spin saw to cut the dash, any thoughts? driller

i met my new boat and after the usual paperwork the orientation captian took me out for a couple of hours. the boat came up on plane fairly easily.it has t5.0 bravo 3 and i was suprised that its best cruising speed seemed to be 3200rpm. does that seem high? 4000rpm pushed the boat to 39.6mph...

after the longest month of the year i fly to ottawa to sign the papers and spend a day with a captian on the 06 290 i purchased.i finished the boat course but other than that i have no clue on what to expect. i have read about a punch list but this boat is a year old.i purchased the 4yr...

i closed on a 290 sundancer but have some questions that might sound dumb. can i operate the gen under power(for the air) where can i look for boat height including arch- cannot locate that kind of info(crazily thinking about a garage for the boat) thirdly the dealer has quoted me...

i will introduce myself-i am from nova scotia and have a cottage on the bras-dor lake.i am shopping for a boat and the toronto boat show afforded me a great oppertunity to see all the boats at once. i am now looking at the 06 290 sundancer and there are several boats all with less than 50...