Hi my old Raytheon Tri data display (depth, speed and temp) has finally stopped working, can anyone recommend a replacement I assume Raymarine would be compatible?
thanks
Scott
Hi
I was out for a cruise yesterday, we just got up on plane running at about 3500 rmps for a minute or 2 when the port engine dropped to @ 2k rpms. I throttled back the the starboard engine and the tried to power back up however the port engine would not exceed 2000 rpms. I intially...
Hi
I am planning a trip to Key west in my 380 dancer potentially leaving june 1 from Bradenton and going to Naples or Cativa the first day then onto key west and staying there at the Galleon until we head back june 7. If anyone is interested in joining the voyage let us know or if you have...
Hi
On my way back to my marina after a 20 mile run I encountered a trouble alarm on starboard engine. All gauges read normal I shut it down and got back to the marina, there are no visible signs of anything wrong on the engine and now a week later from a cold start the trouble alarm stays on...
Hi
Unfortunately I lost my plow anchor and chain this weekend while anchored in some heavy winds so I am reaching out to the veterans here at club sea ray on anchor, chain and rode recomendations for 38 sundancer
Thanks in Advance
Scott
Hi I am interested in purchasing a dinghy for my 99 380, probabaly a 10ft RIB.
I have looked at Nautley and Hurley roll on dinghy ramp however I am concerned it will affect the use of the swim ladder which is located in the center of the swim platform.
Has anyone had an experience with...
Hi
I am considering replaing my canvas and am going to put my camper package on ebay however I thought I would offer it here first.
The product comes from Taylor Fastback Canvas and is about 4 years old and very lightly used. I recently contacted Taylor tand the current cost of this canvas...
Hi
I have a gasoline Westerbeke 7.2 BCGTC and am planning on changing the oil next weekend, I have found the filter and oil capacity (2.7 quarts) however I am unsure which oil to use.
Thanks
scott
Bildoug,
How did you handle the radius on the step down to the rear couch, did you use the same vinyle on the verical portion of the step?
How was the caerpet removal was there a need to level the underlaymant?
Thanks
SW