This may be a shot in the dark, but I will try anyway...
By chance, does anyone have a Tampa Bay/Sarasota area Florida Blue Chart card that will work with a Garmin 188C that they are no longer using?
Hello,
We recently moved to Sarasota. As we get comfortable boating in the area we would like to be able to anchor on or near one of the many sandbars in the area. I can't seem to figure out how to do it correctly, I usually wind up to far off the bar, or end up drifting up to it and then in...
We are working out the logistics of moving our boat to Sarasota. I am checking to see if anyone would have interest in purchasing the trailer - aluminum tri-axle manufactured by TNT once we get the boat re-homed. I can send pics of the trailer and details via PM if you are interested.
Engine hatch lift has broken off the support bar
My engine hatch lift has broken off at the attachment point to the support bar...The lift motor and the lift mechanism work fine. The lift mount attachment point to the support bar has broken or disintegrated. The cross bolt that attaches the...
We are planning to move our boat and trailer from Indiana to Sarasota, Fl in September or October. We can have the boat and trailer available for pick up in Indianapolis, IN or Louisville, Ky (or other nearby point).
I thought I would check here first and see if anyone had recommendations for a...
We are planning to move to the Sarasota-Bradenton area within the next two years. In the meantime, we want to relocate our boat to the area this fall. We are looking for marina recommendations that can offer dry slip service as we will most likely be able to use the boat bimonthly during our...
Hello,
Any members of the board have a 280SS with a factory (or aftermarket) AC/heat unit? If so, can you tell me where the factory mounted the unit ran the ducts/vents and placed the controller? I am considering adding an AC unit to our '99 and I would like to get as close to "factory stock"...
Anyone have experience adjusting Morse dual throttle controls? I think mine need adjustment as my starboard engine does not throttle up past the mid point of the control. From idle to mid, the throttle control sticks are in sync with each other. From half to full throttle, the starboard engine...
Ever notice with boats that they tend to act up at the wrong time?We have been enjoying the beautiful weather on the lake this holiday weekend. For some reason, an engine alarm has decided to sound. Now I get to play detective. At least I am lucky, the 5.7's are carbed so it can only be temp...
The Garmin 188C Sounder on my boat is dying. Before I go the route of purchasing a new replacement, I thought I would check to see if anyone on the forum has a 188C device that they are no longer using. If you do, please let me know.
Thanks!
Hello,
If anyone with a 280/290 SS, CC or BR is interested, I have created a group in "community" section. May be a great way to share info about our boats.
http://clubsearay.com/group.php?groupid=34
I am looking for ideas on removable dock bumpers. Our marina does not allow us to permanantly attach (bolt) bumpers to the slips. There is decent rubber on the slips, but I am looking for some extra protection on the finger corners and to keep the swim platform from banging the dock center.
188C replacementHas anyone replaced a Garmin 188C unit with a modern device? I am wondering if there is a current Garmin that can use the existing transducer and cabling that is already in place?
Has anyone replaced a Garmin 188C unit with a modern device? I am wondering if there is a current Garmin that can use the existing transducer and cabling that is already in place?
Does anyone have suggestions on where I can find an extended swim platform for my 280 Sun Sport? I have a quote from swim platforms.com. They make a great product, but I am looking for other sources as well.
***Moderators - feel free to move this post if necessary***
Hello,
Just want to announce that I have started a group for Monroe Lake boaters. Plan raft-ups, get togethers, share info about the lake and marinas, or just stop by and say hello.
The group can be accessed in the community...