Can someone please help me with the form to USCG?
I guess the one I need are: Credit Card Form
I need:
-Deletion letter.
-Copy of Abstract of title.
-Certified copy of Certificate of documentation w. seal.
Total of $25 + $15 + $4 + $4 = $48.
But can't see what the Application fees are?
And...
That’s a lot of switches. And not looking original.
One DIY solution I considered was to yank out all interior in the EIM units. And put in uniprint-bord with hold relays and automatic fuses to stand under the original fuse caps in the front. (You can probably reuse the fuses in the EIM unit.)...
Jahoo, finely everything works like a charm.
Units in my boat now:
AFT EIM: 1447606 (original from 2003)
FORE EIM: 1810624
L/H pad: 1810625
R/H pad: 1810626
Tested cables and everything around, without any faults.
Borrowed 2 switch pads from another sundancer with PN: 1606581 and 1718618. Both worked fine in my boat. So finely I can say that the problems are both switch pads.
But all the PN on switch pads I could find was not possible to order any...
I had an overhault on mine. Can’t recall any follower nut with direct drive?
And from what I can tell my actuator are the original with pn: 1552041
In mine there are bearing balls pressed trough a screwslot by the rod to make the up/down movement. So if you continue pressing"up"/"down" button...
Thanks.
For what I can see you have to return the original certificate of documentation to get Letters of Deletion...
My maritime authority states they need both with apostille to register my boat...
Since I only have a certify copy of the certification of documents I guess the boat can...
I want to register my boat in the Norwegian ship register. And they demand the boat to be deleted from any old register first.
And they need original "deletion certificate" with apostille stamp to approve.
I only have a copy with simple "I hereby certificate this to be a true copy...." stamp...
Old name on the boat when arrived from US was Nancy Sue. Not a catchy name here in Scandinavia.
A quick rename seremony later, and the new name was inspired from the Norhern viking runes and norse mythology:
Jara Wynja
Jara: represents 4 seasons, the life cycle, Yin/Yang, change for better, Take...
One plastic top over one of the automatic fuse was gone. Moisture had free access to the printboard. So print is totaly corroded, and no chance to fix.
I did get a new EIM from the SeaRay system, but as stated in first post it did not work :huh:
Now I finaly got an answer from SeaRay US:
Jan...
The FORE EIM UNIT printboard was corroded. The partnr on the old EIM unit in my boat was 1447598 (In the 2003 part catalog the pn states:1718629). I ordered a new EIM for a 300 2003 model.
Partnr on new EIM was 1810624. When asked why, the answer was that the new EIM I got was a newer version...
I only find the user manual 90-899883345. But there's no Axius diagrams/pictures in that manual.
So If you find a way to upload, or mail it, I really would appreciate it.
Thx
Not retrofit yet, but they looking in to put a kit on the marked in 2012 according to my local dealer.
And the "879270095_AxiusBro_1009_1.pdf" states partnr for kits. So I hope to see a retrofit soon.
I still like to see picture of the Axius servo installation, to see if its room enough in...
Anyone have picture of the Axius servo installation?
And what about the steering column? In the system architecture diagram it states "electronic steering column". Is it just electronic connected. Or hydraulic conected, with electronic position feed?
Anyone know the price for this unit in US?
Noone of the dealers I contacted in USA has answered yet.
Only 2 dealers here in Norway. And the price was $1400:smt119
A worker in an neighboring countrie dealer has one at home "like new" for $610. ($770 new in the store.)
If the US price new is...
Noone?
I see that its used on many of the other Sundancers.
And that repearing the one I have is almost imposible due to the programing on one of the ICs.
Hello everyone.
Bought a nice Sundancer 300 - 2003 where the plastic hood over one of the fuses on the forward EIM unit where missing. And therefore destroyed by water.
Where is it possible to get a replacement EIM? New, or used.
My part manual lists pn: 1718629
But on the Elec Interface...