Hi guys
Think is time for me to update/replace my tank fuel senders. Gets different readings between the tanks. Have anyone updated on their 340? Any advice/rekommendations what to buy.
? Thanks.
//Jan
Tried to post à pic of the circuit breaker , but it didn't work.
but it looks like this: http://www.ase-supply.com/mobile/product.aspx?ProductCode=mi%2D184100f
No reset. Don't know the funktion of this breaker?
But can troubleshoot it in another way?
I am thinking the problem is
solenoid or...
Kreole Kid,
My breaker don't have the red reset button :(
I bypassed the breaker by connecting the red cables together, the symtoms are still the same. Clicking windlass solenoid, but button don't enlight...
Hi guys
Having problem with my windlass in my 340, Lofrans progress 1.
I can´t get the helm switch to enlight and activate the windlass.
I have cleaned all contacts, also at windlass
I have 12v at the switch (red cable)
I have tried a new switch
I have runned the windlass by connecting a...
Hi guys
I continue on this thread. I have a simiular problem.
I also have a 340 SD with Lofrans progress 1.
I can´t get the helm switch to enlight and activate the windlass.
I have cleaned all contacts, also at windlass
I have 12v at the switch (red cable)
I have tried a new switch
I have...
I have a pair of 2001 Merc 496 Ho engines in my boat. Having problem with the boat bogging down due to debris inside the fuel tanks, looks almost like fine sand.
Don´t have the cool fuel 3 module.
I only have a Merc spin on fuel filter after the Boost pump. Read that in prior years, Mercruiser...
Hi
I put it up for auction on Uship.com. Worked out perfectly. The firm the won the bidding cept contact with the seller and deliveryadress. So it tooked 4days to ship from CA to MI.
The canvas has now been shipped with the container and will arrive in Sweden in the middle of May.
I handled...
I bought it from a private person, not at canvas shop.
The canvas will be folded into a box. The bows tapet together into one, with no loose parts.
But yes the bows are quite wide, about 10'.
There are no problem with space inside the container in Michigan. So I don´t want to disassemble the...
Hi
I live in Sweden and have bought a full camper canvas to my Sea Ray 340 in CA, complete with steelarcs.
There is a container leaving to Sweden from Michigan so I can get it in a simple way to Sweden.
But need your advice. What is the best (cheapest) way to ship this canvas with arcs within...
The engines have 400h on them, the sparks and filter where changed before this season. When I go over 2000rpm the engine start to go bad, and then I have to go down to 900rpm and then slowly increase the throttle so I can continue driving. Almost feels like that something plug the fuelline...
Have pluged in the engines to computers, two times, and no specific alarms second time. The Mercruiser dealer recommended to check fuel or ignition. Common that the fueltanks get dirty?
My 496s MPI is running perfect on idle, have tested the compression on both engines and they are good. If I cruise slowly on 1000-1500rpm, everything seems normal, good temp and oil pressure.
But then when I start to cruise over 1500rpm, starboard engine tachometer starts to "jump" 4-500rpm...
We are getting closer =)
Jimmy; I think you are right this must be the Idle Air control unit on the pictures. And as you can see on the diagram the "nipple" is not found. OR is this maybe the old #9 Not longer avalible part...I have to go down to the boat and see exactly where this part is...
Hi
Have just installed two 2002 496 Engines in my boat, everything works perfect, but I can hear a sucking sound on both engines when they runns.
I have located the sound to the nipple seen on the pictures, if I put my finger to it it sucks me in.
It is on the back of the engine, the...
Have changes my engines from 6.2L Small Block to 8.1 425hk Bigblock, and guess I should change my props also.
Sea Ray uses 18 x 22 for the big blocks in this 2002 Sea Ray 340, does anyone have a pair for sale or other recommendations?
I have had a dialog both with Scott and Marinemarks, very professional both of them with quick responses. Scott likes to work with woodgrain materials, but I wanted a more sporty look. I looked a different carbon sampels but didn´t like any of them. So finally i ordered solid brushed aluminum...