- Nov 4, 2019
- 2,480
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
Ordered.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Will let you know when I ship them. Just like everything else these days, I had a hard time(and still have it) getting a critical component machined. In order to not have this issue in the future (which doesn't really help you), I did a 14 hour round trip yesterday to Toledo, Ohio and back to pick up more raw materials. Not going to make another promise and miss the ship date again but, I do hope to ship yours on Thursday.
Not a rush but hoping mine is in that batch going out on Thursday?Will let you know when I ship them. Just like everything else these days, I had a hard time(and still have it) getting a critical component machined. In order to not have this issue in the future (which doesn't really help you), I did a 14 hour round trip yesterday to Toledo, Ohio and back to pick up more raw materials. Not going to make another promise and miss the ship date again but, I do hope to ship yours on Thursday.
Yes, yours will be in the batch that goes out. Just had a long talk with Machine shop. They are on track now. They are good guys and do a great job. Their products tolerances are absolutely accurate and spot on. Quality versus Quantity. I go with Quality every time. Yours should go out on Thursday. Worst case Friday.Not a rush but hoping mine is in that batch going out on Thursday?
Thank you, we are on track to be able to ship yours this week too.Just ordered
JB
if you are saying you placed an order, I do not see it on our website.Email sent to order
Order is now complete. Thanksif you are saying you placed an order, I do not see it on our website.
All good. Will get order out ASAP.Order is now complete. Thanks
Will let you know when I ship them. Just like everything else these days, I had a hard time(and still have it) getting a critical component machined. In order to not have this issue in the future (which doesn't really help you), I did a 14 hour round trip yesterday to Toledo, Ohio and back to pick up more raw materials. Not going to make another promise and miss the ship date again but, I do hope to ship yours on Thursday.
I think it’s me just learning. I had to loosen them enough to get the bar down in the track. Even still, these will be much easier to get in and off vs stock for sure.Should take a half turn to tighten. The first time it may take a couple turns, but you loosen just enough for release bar to rotate when you remove. Then the next time you install, it’s just a half turn. Please let me know if you have any issues. I used the pair I sent you for a weekend. Should be good to go.
Just wanted to report back on my experience with this setup. So far very happy. When I first tried on my tracks they did not fit. Tried on friends boat of the same vintage and they dropped right in so I figured my tracks probably needed some tuning. I took a file and spent about 20 mins per side cleaning up the tracks and bam!..they dropped right in. Removal and drop in is breeze and they lock securely enough so no worries there. Great mod for a clear platform.Something to keep in mind is that I’ve noticed that the stop bolts for the old system tend to cause burrs inside the track and the burrs might be interfering with the rotation of your t-locks? The burrs coupled with corrosion are what sometimes made the factory system hard to slide and remove. You’ll notice that I now offer the platform extrusion for sale. Depending on the severity of your burrs, you should be able to use a dremel tool to clean yours up. I’m thinking about replacing my platform extrusions when boat is on the hard pan this year. Thanks for the interest.