Robert DFW
New Member
- Nov 19, 2018
- 20
- Boat Info
- 2006 40 MY
- Engines
- 8.1 Horizon
Thanks much, that explains it. Something fun to experiment with!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Thanks much, that explains it. Something fun to experiment with!
One other question. The Master Stateroom interior temp is way off, reads 93 degrees consistently. Is there a specific temp. sensor I need to check/replace? Or could it be something else?
Ok Thanks for the info!In the manual, it will tell you how to calibrate what you have. Try that first. If that does not fix it, a new temp sensor is less than $50.
Bennett
Yep, six screws. Lifted right out. Now to find an upholstery company!! LolNot positive, but I seem to remember cushions are secured with screws from underneath. Open doors to cabinets below berth to find the screws. Hope this helps.
My boat is all wrapped up for the winter or I would look, but I believe on mine there is an access panel in the floor of the cabinet above the TV.Does anyone know how to remove the TV in the aft stateroom(06 MY)?Can't seem to find anything. Pulled the access panel to the salon ac's and found the salon TV bolts for removal, but can't access the aft. Any suggestions?
I’m tracking the same problem on my 2005 390. The latest is a possible leak in the area where the fresh water pump and associated plumbing are. The boat is currently winterized but will be back in service in a couple of weeks. Open the access door behind the master suite head and see if you have evidence of a leak. My guess, if the leak is there it occurs after turning the pump off and pressure bleeds off. No leak running or with the pump on. It always seems to be the same amount of fresh water under the stbd engine..........Hey team, I am getting fresh water into the enclosed trough below the Starboard Engine. After it builds up it then leaks into the open trough under the engine. I am trying to figure out the source of the water.
Does anyone know of any documents that would show a better structural overview?
Thanks, Steve MY40 2006