menos22
Member
- May 26, 2009
- 165
- Boat Info
- 1994 Sea Ray 350 Express Bridge
- Engines
- Twin 454 Mercruiser With V-Drives
Good Morning. I have a model 85b icer-ette up until a week ago it was making ice like a champ, then it just stopped making ice. It goes through it's cycles and gets cold but it is not getting water into the ice tray. My first thought was the water solenoid valve, replaced it with a new one, still no water to tray. Checked the voltage on the two wires that connect to the water solenoid, (brown and white), during the cycle when it should be providing 120vac to the solenoid to open it up, only getting about 6-8 vac at the connection. Tested the solenoid by applying 120vac directly to the solenoid and it worked fine. Any ideas, thoughts would be appreciated. Already spend 50 bucks on the new solenoid but don't think that is the culprit. Would like to hear any ideas what to replace next, control module, or the whole tray assembly. Thank. Mike