Quicksilver 7.5G--HELP!!

[searay3700]

This is my first posting on Club Sea Ray and I want to say hello to all of the members.

I have a Quicksilver 7.5G generator on my 1991 Sundancer. The voltage when the generator is running cycles between 0 (zero) and 195 volts. I shut the generator down and had no damage to systems on the boat. My best guess is that the regulator on the Q/S is bad and I have a new regulator. (Zbatt power systems carries parts for the Q/S generators).

Question:
Does anyone know where I can download the service manual for the generator on the unit. I can find the service manual for the engine and the engine electrical system but have not been able to find a service manual for the generator. (I need some guidance on trouble shooting and parts installation instructions).

Thanks!!!

Searay3700

 

[rondds]

http://www.partsfortechs.com/asapcart/page.html?chapter=0&id=13

edit: whoops - just read you post again. No idea where to find the shop manual for the generator portion. I've never seen one referenced before. Sorry!

 

[fxshuster]

was it the regulator, I have the same issue.

 

[PlayDate]

After dealing with a ton of questions regarding the Quicksilver Generator, I posted the complete service manuals on the Restoration Marine website a few years ago. Here is the link:

http://restorationmarine.com/projects.aspx

The manuals are at the bottom of the page.

Best,

-John