generator voltage

I have a kohler 7.3e that recently stopped running. I would not remain running unless I held the start button down. I replaced the voltage regulator fuse and now the generator starts/sounds great but is producing greater than 150 volts. There is a adjustment screw on the voltage regulator...

New owner here with 2006 280 Sundancer w/ Kohler generator. The generator starts and runs no problem -- the issue is when I turn off the shore power, slide the cover to generator and turn it on ... NO Power. The generator is still running but no power the green light isn't on and the needle...

Ok, So I have one of those out of date and somewhat old Generac's. I have replaced the Voltage Regulator and adjusted it to show 120 Volts. My problem is, when I turn on the A/C it sounds like a rod knocking on a car and it's not cooling quite like it does on Shore power. So I went back to check...

This is my first posting on Club Sea Ray and I want to say hello to all of the members. I have a Quicksilver 7.5G generator on my 1991 Sundancer. The voltage when the generator is running cycles between 0 (zero) and 195 volts. I shut the generator down and had no damage to systems on the...