Hi all. Newbie boater here needing help. I have a 99 SeaRay with a 125HP Mercury outboard. I’m having issues with the throttle only button on my Quicksilver 3000 throttle control unit.
I depressed the button and gave it throttle to start the boat like I usually do. Only this time the button...
I know questions on this generator have been beat to death, but I have been pouring through the posts on the forum and I can't seem to find my specific issue previously posted.
My QuickSilver Generator 7.5G starts fairly easily and runs smoothly. Handles the load of both AC units and with a...
Hi all, I have just moved up into a 2002 300DA and was wondering if anyone has upgraded the dual quicksilver throttles to newer technology. If so how hard was it and which throttles did you use as replacements.
I find that mine are very stiff, as well as when they are advanced forward together...
I've got a 7.5KW Quicksilver genny in my 1989 340EC. The generator was running perfect when I winterized it last year.
When I went to install the battery this year starter is turning without the bendix drive engaging as soon as I attach the battery cables. For some reason I'm getting power to...
Price $1,600
New in box MerCruiser Riser Kit 6"
Part Number: 879288T83
Was purchased for an 8.2 L Bravo 3
Located in Oxford, Maryland
Buyer responsible for pick up or shipping costs
Price: $300
New in Box Quicksilver (MerCruiser) Intermed Elbow Kit 6"
Part Number: 879288A15
Was purchased for an 8.2 L MerCruiser Bravo 3
Located in Oxford, Maryland
Buyer responsible for pick up or shipping costs
My Quicksilver QS-6.5G generator wasn't getting fuel, so I replaced the fuel pump. I replaced it with an Airtex E8251 designed for small carburetor marine engines. Cost me $52 at JK Auto Parts up the street from me, but on Amazon I've seen it for $50. The Quicksilver part# 811508 / Generac 74024...
Someone please help me! Over the weekend I was using my Quicksilver 6.5kw Generator (QS-6.5G) to run the A/C and stuff. Ran fine for 5-6 hours, and then in the middle of the night (3am) the circuit breaker popped out, killing the power and generator. In the morning I pushed the circuit breaker...
I have my Quicksilver 5kw generator from my Baja boat out for repairs. The repairs are complete and ready to reinstall however, when the battery is disconnected from the generator while running the generator dies. Is this normal? With a Vehicle, when the battery is disconnected, It continues...
As promised, the link below will take you to the Projects page of the RM website. At the bottom of the page you will find two links for the Quicksilver Service Manual. The first is for the elusive Chapter 1 and the second link is for the rest of the Service Manual which is commonly available...
This is my first posting on Club Sea Ray and I want to say hello to all of the members.
I have a Quicksilver 7.5G generator on my 1991 Sundancer. The voltage when the generator is running cycles between 0 (zero) and 195 volts. I shut the generator down and had no damage to systems on the...
Ok so today I fire up the ginny to kick on the AC for the kids. It fires right up, but It's not putting any power out. Checked the panel and made sure all the switches were in the right place. But nothing on the meters. Other than when I flip the switches the meters move ever so lightly, but...
Hello everyone, I am a new boater but i am very familiar with automotive. This problem has me stumped. the port side throttle cable was adjusted because it was taking to long to go into reverse. Now it goes into reverse and forward fine but i cannot get the throttle only button to press in. Any...
I own a 1995 Regal with a Quicksilver QS5.0 genset.
A year ago it wouldn't turn stay turned over and the yard that tried working on it destroyed the entire heat exchanger and exhaust manifold connections.
I have been looking for these parts with no luck and found this forum where a number of...
Prop threads are popular, so here is a new one:
A rock damaged my OEM 14 X 19 aluminum prop. I purchased a 14 x 19 stainless Quicksilver Lightspeed. I was not looking for any magic bullet, but was hoping for some benefit.
I suspect my tach is out of whack because with both props it easily...