my DOG HOUSE
Member
- Apr 7, 2012
- 307
- Boat Info
- 2006 290 Sundancer, 2002 F-250 7.3 Powerstroke
- Engines
- Twin 5.0 MPI B3
Does anyone know what their dead draw (Batt switches off) is? Mine is .2 amps on all three batteries, that seems a little high.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Does anyone know what their dead draw (Batt switches off) is? Mine is .2 amps on all three batteries, that seems a little high.
Does anyone have a list of LED replacement bulbs? I am looking on http://www.superbrightleds.com/
Thanks.
BA15D Bayonet 18 LED Navigation Bulb for Anchor Lights - 3W - Cool White 1x (anchor light) |
Festoon 6 LED Bulb 42mm 0.9W - Cool White 3x (cabin lights) Festoon 9 LED Bulb 42mm 1.2W - Cool White 2x (arch lights) |
How to turn on the cabin speakers in the V birth of a 2007 290 DA?
Is there any way to monitor the fresh water level short of opening the hatch and climbing in for a look? 2007 290 DA.
Looking at an '06 290 to purchase. It has a blue hull, and there were quite a few scratches and oxidation. It does not appear that the hull has been well maintained. What is the likelihood I would be able to get the hull looking decent with compound and polish? I know its a tough question without pics, but maybe someone with a similar experience could comment. Also, is there typically an inch or so of standing water in the bilge?
Thanks
I agree completely! The colored hulls are a lot of work, but I do think they intentionally make them a little thicker. Also agree with right tools and materials, I really prefer 3M professional products (made in USA) excellent quality. As far as paying someone to do it.... Its not just a matter of $$$ vs laziness Too aggressive and you will be repairing gel coat, not enough it will still be hazeyThe colored hull takes "alot" of work, but the result is definitely worth it. I was very surprised at the thickness of the gel coat, dock scar :smt021.
Yes its intentional. while runnig it should be in "both" If you stop engines and have Accessories tuned on, stereo etc. switch to either 1 or 2 then If it runs completely out (forgot about it ) you still have good starting battey .2007 searay 290 Sundancer. Can anyone explain which battery runs which devices? I have an A-B switch and then a single switch under the Port cabin seat. It seems that either motor and the cabin will work with the switch in the A or B or both position. Is it intended to be this way?
2007 searay 290 Sundancer. Can anyone explain which battery runs which devices? I have an A-B switch and then a single switch under the Port cabin seat. It seems that either motor and the cabin will work with the switch in the A or B or both position. Is it intended to be this way?