M Prod
Well-Known Member
- Oct 6, 2017
- 1,438
- Boat Info
- 2005 Sundancer 340
Zodiac Cadet w/FCT console Yamaha F20
Kohler 5KW Genny
- Engines
- 8.1 Horizons /V Drives
M Prod, thanks for the quick response. To take that pic I did not pull the head-unit. Pulled the circuit breaker panel and stuck my iPhone in the opening and started snapping pics until I got one that showed the RCAs. Question on placement of your Bluetooth Module/Dongle. Did you place it behind the head-unit/circuit breaker panel inside the cavity? Or did you run the aux cable outside and then attach? The Aux is on the head unit above the breaker panel not the unit above the galley? The Bluetooth adapter I have needs 12v so I need to figure out powering it. Ordered the RCA to 3.5mm adapter and plan on plugging in Friday evening for sound test. Plan is to get it working then figure out the cleanest permanent installation. Thanks in advance for any advice.
Yep I installed it on the Clarion unit on the panel. (I ended up replacing the unit above the galley altogether with a new Kenwood Bluetooth deck). So far as the clarion, the module I got also needed the power supply. Again if memory serves me correct, I used the Clarion’s power and ground wires ...just cut them and spliced the module in the reconnections.
This is the Bluetooth module I put in:
https://www.jlaudio.com/products/mbt-rx-marine-audio-bluetooth-receiver-91126
Last edited: