That is gorgeous. Exactly what I plan to do on my 19 SPX. Thanks for posting!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
That's interesting Dizzy. I would think some of those options on a US model would have been popular. I would have opted for the table and extended aft sunpad. Thanks for the pic.When I was looking at the SPX 190 I saw a few with a cockpit table, extended flip up sun pad over the transom walk, as well as a center infill in the bow The infill was a full bow sun pad with no walk through, but possibly a removable. I only saw these options on international models...I managed to find a pic on Sea Ray's global site.
That's interesting Dizzy. I would think some of those options on a US model would have been popular. I would have opted for the table and extended aft sunpad. Thanks for the pic.
I think we need to be looking into whether these items are orderable from Sea Ray...
Do you have a picture of the table set up? Curious to what size/shape they used. I didn't see it on the global site, just a picture of the table base. BTW, It appears you really did some research/homework before you bought.As you can order a boat with these feature off the global site I would assume so. They are part of the "captain's package" on global.searay.com
Do you have a picture of the table set up? Curious to what size/shape they used. I didn't see it on the global site, just a picture of the table base. BTW, It appears you really did some research/homework before you bought.
That is gorgeous. Exactly what I plan to do on my 19 SPX. Thanks for posting!
Well, I was going to take some measurements today and just noticed the two pcs I was going to order are the ONLY sections without dimensions in that PDF file from SeaDek. Figures...12 and 13 are the ones I am going to add as well.
Well, I was going to take some measurements today and just noticed the two pcs I was going to order are the ONLY sections without dimensions in that PDF file from SeaDek. Figures...
Trust me Jeremy, you don't want me doing a template. I can't draw a straight line with a ruler. They do offer a "dry kit" for 5 bucks a piece, so I may order that first to see if it fits. I think it's a pretty quick delivery for those.
You are correct sir. I ordered the kit today. I can verify most sections except the middle sections of your swim platform. ( I have the OB Version) I can mail you the kit when I'm done if you want to check those. And since Jeremy has the same boat as mine, I'll verify fit for him on the peices he wants. BrianFrom my conversation with them they will send out a kit with all of the pieces cut out of mylar so you can test the fit. They quoted me $20 total for all of the pieces on that template I posted.
It would be super helpful if someone on here who's boot isn't wrapped right now could order that kit and verify the fit. I'd chip in part of the cost as well.
Frank
13"WX19.5"L There is a removable lifting arm on the one side that sticks out an inch. Can't remember how deep but it's at least 20"I have a new SPX 190 arriving in March. A few questions for those who already have theirs.
I was going to get a Rubbermaid for the drivers side rear storage area next to the engine. What are the dimensions or what do you do?
I have the 4.5L 200hp engine. Looking for a good spare prop.
Regards,
Dizzy
Sent from my iPhone using Tapatalk
13"WX19.5"L There is a removable lifting arm on the one side that sticks out an inch. Can't remember how deep but it's at least 20"
PM sent. Also Looking at pictures of the storage area you were asking about and it looks like SR changed the bottom of that section in 2017, so I'm not sure if it's the same depth now.Thanks Bridog! How much is Seadek quoting for sections 12 & 13?
Sent from my iPhone using Tapatalk