- Nov 26, 2006
- 7,628
- Boat Info
- 2008 44 Sedan Bridge
- Engines
- Cummins QSC-500's
Straight Drives
Start engines and run at 1000 RPM for 15 minutes.
Shut down and open hatch with preparations in place (tools...).
Place Jabsco on top of Stbd Engine - Connect to Stbd Battery Bank.
DO NOT PUNCH HOLES - Unscrew filters until just beginning to separate from base.
Remove oil filler caps and dip sticks.
Connect Jabsco to Stbd engine. Turn on until air sucking sound heard.
Remove tube while pump still running to avoid dripping oil.
Turn off. Place tube in 1 gallon jug. Reverse flow. Fill 1 gallon. Change jugs. Fill 2nd jug.
Connect Jabsco to Port engine. Suck oil out.
Remove Stbd filter - clean excess with paper towel. Repeat to port.
Re-fit Jabsco to each engine and suck out excess.
Screw on new filters. Add oil. Keep checking levels. Replace dipsticks and filler caps.
Start engines and fresh water rinse. Clean up.
Please ignore spilling oil while taking photos and dirty bilge.
Shut down and open hatch with preparations in place (tools...).
Place Jabsco on top of Stbd Engine - Connect to Stbd Battery Bank.
DO NOT PUNCH HOLES - Unscrew filters until just beginning to separate from base.
Remove oil filler caps and dip sticks.
Connect Jabsco to Stbd engine. Turn on until air sucking sound heard.
Remove tube while pump still running to avoid dripping oil.
Turn off. Place tube in 1 gallon jug. Reverse flow. Fill 1 gallon. Change jugs. Fill 2nd jug.
Connect Jabsco to Port engine. Suck oil out.
Remove Stbd filter - clean excess with paper towel. Repeat to port.
Re-fit Jabsco to each engine and suck out excess.
Screw on new filters. Add oil. Keep checking levels. Replace dipsticks and filler caps.
Start engines and fresh water rinse. Clean up.
Please ignore spilling oil while taking photos and dirty bilge.