OldSkool
Active Member
- May 8, 2010
- 4,360
- Boat Info
- restored 1976 SRV200
- Engines
- 188 Mercruiser I/O
I took the handle and underbrace and move it to the right side using the same screws over but filling every hole I drilled with silicone. I coated the back of the braces and the screw with silicone as well. You just can use to much of the stuff. I wasn't thinking about duplicating the platform so I didn't keep track of the hardware sizes as I should have. I'll go down to the shop tomorrow and see is I can get you the assorted screw sizes.