Buff Magic

[WIPlayDate]

Wow, 20% off, a free loli-pop and lip balm. I'm going to keep ordering. I got my order yesterday and can't wait to start cleaning the boat. Isn't it strange that all of us adults can't wait to work and clean something? :huh:

Order has been placed. I'm a first time user...thus, I'm really looking forward to the free loli-pop and lip balm...and the product of course. :lol: Thanks again Barry!!!

 

[shurhold]

I figured it won't spoil (will it Barry?). It should last my 330DA 5 years or until I get my 500DA, whichever comes first. Thanks to Barry for the discount!

Just make sure you keep the lid tightly closed, and stir it well each time. Also try not to leave it out in extreme temperatures for prolonged times. While none of this is normally an issue if you plan on making it last several years this will help.

 

[SummerDeis]

Whoa how are you getting 20% off?? Talk to me, i am about to order my restoration and wax, but if I can get 20% off, that would make me even happier!

 

[At Ease]

Enter "CSR" in the promotion area during checkout.

 

[SummerDeis]

Thank you At Ease!

 

[SummerDeis]

At Ease, just curious, what cleaning product(s) did you order?

 

[Bucit]

Has anybody used the "mold remover" product from Shurhold? Is it safe on the vinyl seats and did it do the job?

 

[320Bob]

Use a 3" cheap paint brush to apply a thin layer of Buff Magic to the area. Work in a 2' square and with the brush paint lines of BM randomly through about 50% of the area. Then using the WOOL PAD and the Dual Action Polisher start at a speed of about 3. Be patient and let the polisher do the work. Once you have worked the area a minute or 2 bring the speed up to a 4 or 5 for a minute. Then wipe away any excess with a towel.

Let me know how that works for you.

Barry,
I used this your technique today along with a new wool pad and got much better results than before. To get a mirror shine, I had to do it a second time to remove all the dullness and micro scratches as shown in the pictue below which was taken before applying polish. Thanks for the tips.

 

[Vince_nj1]

I buffed 1/2 my boat this weekend. My wrists, neck and elbow hurt from that stupid Porta Cable, but the results are promising. Once the swelling goes down, I will return for the other half. These pictures are before any polish.

 

[At Ease]

At Ease, just curious, what cleaning product(s) did you order?

Buff Magic and Serious Shine.

 

[VRay]

Order placed. Thank you very much.

 

[floriduramax1]

"I buffed 1/2 my boat this weekend. My wrists, neck and elbow hurt from that stupid Porta Cable, but the results are promising. Once the swelling goes down, I will return for the other half. These pictures are before any polish."



Boat looks great but those blocks look a little "shaky"..lol

 

[kkalsch]

This qustion may have been asked and answered -if so -sorry. I own a porter cable 7424xp does it do the samething as the Shurhold -Dual Action Polisher?

 

[Vince_nj1]

Nice isn't it? The marina blocked it at 6 points. 2 bottom and 4 corners. The front starboard isn't even touching. The boat is resting on 5 of the touch points. If if didn't fall after this winter, it should make it a few more weeks. :thumbsup:

 

[Bugsy24]

Hey does anyone know if Barry's pads will work on the Porter Cable, it's a 6 inch backer?:huh:

 

[Nehalennia]

That looks really good. You did that with the PC not a rotary?

 

[Vince_nj1]

That looks really good. You did that with the PC not a rotary?

Yes. Porta Cable 7424 Orbital with a wool pad. I have not applied the polish yet.

 

[Bugsy24]

Hey just ordered the Whole Shebang! Buffer Kit etc.... anyone want to buy a porter cable 7424? PM Me!:grin:

 

[At Ease]

Hey does anyone know if Barry's pads will work on the Porter Cable, it's a 6 inch backer?:huh:

I use them on my Flex Orbital. I would believe they would work on the PC as well.

 

[At Ease]

Yes. Porta Cable 7424 Orbital with a wool pad. I have not applied the polish yet.

I have to say that those cinderblocks look scary as hell to me.