JB MARSHALL
Active Member
Where are you guys installing these USB outlets? Are you replacing a regular outlet with one?
48 DA Owners Club
- Thread starter rwvw415
- Start date
I am going to replace the phone plug and the others will be replacing the blank cover between the receptacles
- Nov 4, 2019
- 2,481
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
Silly question I am sure but I assume you guys are just powering these from the receptacle right next to it?
@ocgrant
@jeffrey vargas
I checked on the Cummins parts portal for my engines but could not find any reference to that bracket for the fuel inlet supply line. Strange....
jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
Sounds like my plan as well
yes
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
Yes i just put it in the blank spot between the outlets in every room and 2 in the kitchen. Super easy to just run a 16 gauge jumper from one outlet load and neutral to the usb. I may add more to replace the phone jacks if I find a need. I wanted a double USB but they only have them in Europe from an aftermarket supplier at 230volt only.
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
FYI.. to all the DIY'ers the blanking plate and usb pop in from behind the panel not in the front like you would expect. Its Italian...LOL
jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
I'll let Grant comment on this as I haven't got that far. Dang, I think it's going to be tough to find that bracket for the fuel line.
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
Did you ever call Tony at Seaboard? If anyone can find it he should.
JB MARSHALL
Active Member
You talked me into buying 3 of them
also purchased two LED engine room lights to try out. Wow that was an expensive shopping event.
jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
Which LED lights did you get for the engine room? I was looking at those too!You talked me into buying 3 of them
jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
Left a message with the parts guys. I'll check back.
Ya I know this forum can get expensiveYou talked me into buying 3 of them
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
If they get back to you tell them we need 4, I will take 2 from them.
jeffrey vargas
Active Member
- Feb 4, 2019
- 310
- Boat Info
- 2008 Sundancer 48
Previous
2004 Sundancer 390
2001 Sundancer 380
2000 Sundancer 34
- Engines
- Cummins QSC 8.3
will do!
JB MARSHALL
Active Member
I purchased 2 of these in cool white
https://www.apexlighting.com/truck-lights/led-dome-lights/f-28-led-engine-room-utility-light/
Think about these; both less expensive than Apex and both put out more lumens; quality is very good.
https://store.marinebeam.com/9w-engine-room-led-fixture-fx-er-9w/
https://store.marinebeam.com/high-line-19-led-fluorescent-replacement-twin-tube-fixture/
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
So I got my 2 fuel pump pipes today, any luck on these brackets?
I heard from Sam today at Technografics that my new dash panel is ready. Looks like this weekend I will be installing my new to me GS165's. I am also going to play with my Vessel View 703, all my harnesses came in and I want to plug it in and give it a test.
Also y buddy from NJ found a Silverton convertable for sale in Pompano he wants me to go look at....
What is everyone else up too?
I heard from Sam today at Technografics that my new dash panel is ready. Looks like this weekend I will be installing my new to me GS165's. I am also going to play with my Vessel View 703, all my harnesses came in and I want to plug it in and give it a test.
Also y buddy from NJ found a Silverton convertable for sale in Pompano he wants me to go look at....
What is everyone else up too?
- Nov 4, 2019
- 2,481
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
Can't wait to see the new screens Grant
Getting one last ride in for the season. She comes out next Saturday.
- Dec 31, 2006
- 2,824
- Boat Info
- H2O Therapy
2006 Sundancer 48
Novurania 430DL
HighField 340-FCT
Yamaha EX-R
Raymarine
PADI DM
- Engines
- Cummins QSC 540's
Thats cool I thought you pulled it already...
Down here the weather has been terrible, blowing and raining. I gave up trying to plan another trip. Still warm but crappy. Now another tropical storm is coming it looks like..... Blowing 40 kts this weekend. At this point I am just looking forward to 2021
