- Jun 5, 2016
- 5,620
- Boat Info
- 410 Sundancer
2001
12" Axiom and 9" Axiom+ MFD
- Engines
- Cat 3126 V-Drives
Anybody ever try to stuff a Isotherm Cruise 85 or larger fridge) in place of the original Norcold DE-451 in the cockpit of a 2001-2004 400/410? The Cruise 65 will fit no problem, but its smaller than the existing one (2.2 cu ft vs 2.7). I'd like a little more room if possible. The 85 is 3 cu ft.
Currently, the DE451 sits on a 2x4 to allow air flow under/around it, and the floor to the top of the flange it 24 1/4". The Cruise 85, needs 25" to the top of the mount flange. Obviously this will require some cutting (if there is room).
I'll measure next time out, but curious if anyone has installed something a little bigger?
Currently, the DE451 sits on a 2x4 to allow air flow under/around it, and the floor to the top of the flange it 24 1/4". The Cruise 85, needs 25" to the top of the mount flange. Obviously this will require some cutting (if there is room).
I'll measure next time out, but curious if anyone has installed something a little bigger?