Nepenthe
Active Member
- Aug 29, 2011
- 148
- Boat Info
- 400 Sedan Bridge
- Engines
- 7.4L Mercruiser
That's the problem I am having - I cannot seem to get the new trim into the channel. One side of the "lip" goes in just fine, but I cannot find a good way to press the other side in. It seems to me this SHOULD be easy. I am wondering if the trim I got is older and not as pliable as it is intended to be?Super easy. Just pull the old stuff out of the channel and push the new stuff into the channel. It’ll be obvious. I “glue” the corners together with a bead of black caulk over the top of the joint. I used OSI Quad from hardware store. It lasts forever outdoors.