douglee25
Well-Known Member
Check the connections themselves on the antenna. From what I've read, the crimping job can be marginal at best.
Doug
Doug
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Does anyone have experience with relocating their boat cross country?
I am currently considering relocating to the South Tampa Bay area from the Twin Cities and would need to have the boat transported. Are there any kind of marine moving companies out there that anyone could recommend? I am curious how much of a fortune this will cost.
Thanks.
I am pretty sure I test drove the boat you bought. I ended up buying one from NC and having it shipped up here. It's alot of work, not just the arch but all the railings, the helm, etc. Here's a picture of the boat without the arch.
http://clubsearay.com/forum/showpost.php?p=285923&postcount=117
Here's a picture of the controls removed.
Thanks for the response-What kind of issues did (do)you have? It would be nice to know and be on the lookout for potential problems with my boat. Thanks !
Hi Mike,
I've had the E-Plex module for the underwater lights and the generator go out twice in the last couple of months. No explanation, really. Hopefully it will be fixed next week when I go back. Not looking forward to worrying about this when the boat's no longer under warranty...
Any problems with the E-Plex for you?
Kevin
I purchased a new 08 36 sedan bridge in Seattle in sept 09 and had it transported to Portland Oregon ( 175 miles). It cost me about $6000; The reason it was so expensive was that they had to take the top/arch off to go underneath overpasses . I know some of the 36 db's don't have arches ( because it is an option) so if you don't have one it may be cheaper. Also, do any of you who own a 36 db have problems getting FM and AM radio reception on your boats? I do and I was told there may be a problem with the radio antana ( SP?) set up on these boats
Fitzroy- How do you reset the computer when the touchscreen freezes? Royal Flush
RE Sun PadHas anyone had a sun pad made for their 36? I was thinking of one that goes over the hatch with some sort of support so it doesn't put pressure on the hatch.
Thanks,
Had this problem. Undo the black panel that holds it is - about nine screws if I remember. Disconnect both the data cable and the power cable and then put back the data cable and then the power. Wrote up a fix email for my dealer that I can send if you want.Fitzroy- How do you reset the computer when the touchscreen freezes? Royal Flush
Depends.Anyone know what kind of mileage the gas version gets?
Thanks,
Kevin
RE Sun Pad
Yes, I can get you some pix if you want. Had it custom made with a cutout for the topside Port with velcro insert.
Mike:Time ina bottle-Please email to me the fix email you sent your dealer. My email is:
mike@miketoddinternational.com