hull

I took on this '89 Bowrider 200 and have been slowly fixing the little issues. Next up is a pritty nasty little scrape at the bottom of the hull, right below the drain hole. It looks like it was backed into something. No other hull damage. Would it be best to reshape that lost V with some...

Dear All , I have always some water in the ski locker on my SLX 250 ( 2008 model ) - i gues from rain via the anchor locker - and floor cleaning - now the problem is that after cleaning the whole ski locker and second bilge pump area, behind the wooden cover for the water tank pump, i found that...

Last week we put the boat on the trailer and one of the cradles came off. The result is two very deep scratches of about a foot long by halve inch wide on the bottom of my sea ray 240 sundeck (see photos below). What is the best way to (quickly) repair this? It would nice nice it it looks like...

Transient momentary forces typically encountered at the junction of fiberglass hulls with their decks or top halves are too great for the tiny surface area of the number 8 self tapping stainless screws typically seen joining large production yachts. The amount of deflection occurring during...

hello help! ;) So my bottom was getting its monthly cleaning and the diver either grabbed the prop or the shaft and wiggled it back and forth. I could feel the thud, thud, thud. He said my “bearing” was shot only on the starboard side. Im believing I should just change them both. I just...

Hey, I've had a 300/335 Sundancer for a couple of months now. As the season is coming to an end, I'm in a process of building a trailer for the boat. I am quite surprised that there seem to be no blue prints of the hull available anywhere...!?!? I am concerned over how can I build a trailer...

Hello all, So I have been looking for a boat for 5 years now. I've seen about 50 boats or so since then. I finally found a 93 550 SB with twin DD 6v-92ta with a 1000 hours on them that I like. Seems that info on these boats is scarce or I am not looking in the right places. I was wondering if...

Does anyone have a cost estimate for cleaning and painting the hull of a 2006 260DA? I am looking at purchasing a 260 that will need this work done after I purchase it.

first-time forum user. Owner of 1984 340 Sundancer 34' purchased late last year. Manual and additional material that came with the boat does not include the blueprints.Assistance greatly appreciated, please.

Hi, new to this group and about 7 years late. Love this resource! Anyway, I’m looking to give my 2007 Sundeck 240 a little love this summer. 1. Does anyone know where I can find a replacement steering wheel? I think the old one I read is a Dino? The wood cracked. I think that’s a...

We stock many OEM seating vinyls for your Searay Boats. Please visit our web site by clicking our banner ad above, or visiting http://www.1888boattops.com/Searay.html We also stock many marine related materials to choose from. Does Your Cabin Need a makeover? We can help. Call Direct at...

I am buying a new (used 2005) boat and trying to decide between two 2005 Sundancer 260DA's...One has a white hull the other has a green hull. Can anyone tell me if the new technology in the gel coat prevents the haze/chalk fading of the hulls. Years ago I had a SR that faded terribly...I don't...

Just bought a 1978 30' Weekender, and looking at depth finders.... wondered if a 'shoot through the hull' transducer will work or not on this boat (they said it won't work on a 'double hull' boat - whatever that is?)...... It is a Hummingbird model if that helps. Any feedback on this is...

I have a major problem on my 420 Sedan Bridge. I am getting salt water trapped between my hull and subfloor - not into bilge areas that is being pumped out. My stringers are about half full of water. I have pulled the boat for maintenance and I was hoping to see the water coming out of the...