I recently purchase a used 2014 350 SLX. I have been having horrible windlass issues. The windlass operated fine, but the anchor line slips on the gypsy and continues to bunch up where it drops into the anchor locker. I have a Quick DP2 512 with 1/2 inch anchor line and 20 feet of 1/4 inch...
I have an 88 sea ray weekender that I shipped from PA to GA, my dad owned it for about 15 years. When I got it in the water, we started having new issues right away. I think some things got knocked around during the trip.
One of the issues was that the cockpit lights would not turn off. I...
Forum Friends,
280 Sundance stern breaker trips when connected to shore power and I have a heavy load like AC turned on. Has anyone had this issue...Here are details and what I plan to try next.
1) On generator everything works fine nothing trips even with everything on at once.
2) nothing in...
I have a 1987 Sea Ray 390.
Recently the marina switched out their AC breakers to a GFCI at the dock service panel.
I run (2) 30 amp shore power cords from the dock electrical pedestal behind my boat (dock service panel connects to pedestal behind boat which has (2) 30 amp breakers, then I plug...
I have a 2001 380 Sundancer with 120v ac electrical system. On friday i was plugged into shore power with the normal things on the breaker panel turned on (a/c, water heater, fridge etc). I went to cook something on the stove so I turned the stove breaker on and turned on a burner. After I...
One of the turbo exhaust manifolds clamp decided to snap on my 460 Express Cruiser causing smoke to shoot all into my engine bay. It then activated the Fireboy suppression system turning off both engines while going full speed :wow: (imagine my surprise). I've refilled the suppression canister...
Someone please help me! Over the weekend I was using my Quicksilver 6.5kw Generator (QS-6.5G) to run the A/C and stuff. Ran fine for 5-6 hours, and then in the middle of the night (3am) the circuit breaker popped out, killing the power and generator. In the morning I pushed the circuit breaker...
My "Shore Power" breaker switch for Line 1 seems to have tripped, but now it won't stay in the "On" position. Breaker for Line 2 works and supplies power. Both breaker switches for the generator work and supply power. Does this sound like a faulty switch, or is there a simpler "reset"...
Ok, so I just had my 320 shipped from MO to TX. The dealership that I bought it through serviced both engines (changed impellers), etc. When I first got it in the water and ran it, the cooling hose came off of port engine, smartcraft alarm went off after the the temp got up to 180ish and the...