Search results

This is the number for my quadrajet 17080561. Should be a tag or number stamped in the edge of the carb.

Actually there are two brown wires. I thought one should have a purple trace but cant see it. Just need to work out which is which with my meter.

Thanks guys thats what I thought. I do have a brown wire near the shower bilge pump thats not connected. I get my meter and check it out to confirm.

I have a switch that doesnt do anything in the head, mounted into the wash basin cabinet, it says SHOWER, shower works with the Water System switch ON. Nothing in the Owners Handbook I have my ideas but want/need someone to tell me. Thanks

Sorry man, no not completed as yet I have been on some of our other islands with work. But also I am waiting for delivery of my new water heater that needs to be installs prior to installation of the genny, and its been delayed a week. Island living yeh!? Realistically i guess the genny install...

Mike I am kinda going throught this now and there are many different opinions on this. However I have found that it mainly comes down to personal requirements and what you use your boat for. I.e. Do you have a generator and how long to you spend on the hook just on batteries ? seem to be the...

a little bigger.... 450 SD with twin Cat 3126's - different world and different bank account :smt089

390X my charger book (sorry its actually a Prosport Gen2 Plus - 3 bank) says each pair of charging cable must only be connected to 1 battery max size GP31, if i go bigger capacity i.e 4D or 8D or in this case 2 x GP31 then I must change my charger - according to ProMariner. Ii appears to monitor...

Sorry 390X but my charger is wired correctly - just checked my book and on-line. Each pair of "Bank" wires MUST only be connect to ONE battery. Charger is a Promariner ProSport 20 Gen2. So just gonna do the same thing withought changing the charger wiring. Except maybe tidy it up a little. I think.

Ok guys. This is what I am going to do... Reconfig and put right the battery charger connections (thanks 390x but thats how it arrived from the PO), use an isolated genny battery (thanks Monaco) and tie the genny battery to the house bank with an ON/OFF switch (normaly OFF). Which in turn...

Aye Aye Captain. Appologies to all that where inconvenienced and point noted. I thought that one was deleted. I moved my question because I wasnt getting any hits.

I guess at the moment I am cautious and take precautions (battery voltage alarm) knowing that I only have my emegency system to get me running. It ocurred to me that complaciency might set it thinking I "ALWAYS" have a genny to get me out the mire.

That sounds expensive. But whats the plan if the your isolated genny battery fails ? Stu

My charger only has three outputs. Currently each batt has its own charger connection. I think that is the deal breaker right there on the isolated circuit system. If I isolate the genny battery (with no charger connected) - then even if I only exercise the genny for 1/2 an hour each week then...

Sounds like you are speaking from experience? How is your genny wired ? So if I connect the genny to the Port engine isolated system I should be good right. Also this batt will be charged by the batt charger while on shorepower and engine alt when running- sol in theory always fresh. If the...

Genny does have a alt - 1amp output. I guess really what I am asking is.... is it ok to connect to an main engine staring system that already has an alternator in the loop (on the main engine) I cant wee why not, I just curious. Its only like having a trickle charge on it right ? If it is ok...

In the process of putting the genny back in the boat. Never had one while Ive owned her but is plumbed and rigged for one. With the expection of batteries/starting. That part of the installation has been messed with. Got a Onan 4KW MCCK with closed cooling - original model to the boat I...

I already have and I am ok. But I am gonna check again now its hauled. Cheers