I suggest that you look at Side Shift bow thrusters. It is the most efficient way to add that type of control. 3rd year with the Side SHift on my 280DA and it is the best way to go. Here is the link: https://sideshift.com/ .
Just replaced the pump in my 280 DA. It removes the condensate from the AC and the shower drain. The float didn't work consistently so I replaced the pump and it works fine. Not a bad install, just a little crowded working on the wiring. And, yes, use crimps!
Has anyone had difficulty with thermostats? I have changed thermostats a few times the past year and have a repeat problem of the engines running cold due to the thermostats remaining open. Just had them changed again and the starboard engine seems fine, but the port engine ran cold in the...
Read about it on the forum somewhere. Atwood LED 3NM Anchor and Masthead Light. I purchased it on Amazon for $64.30. Works great. Screw holes align but need to weather proof with marine grade caulk.
:smt038Thanks! I replaced the old quacker with this and I'm very happy. I drilled a hole in the plastic so that the water will drain from it. The old horn was still filled with water when I took it out!
Trucks are available at teakisle.com. I have a 2008 280DA and the upper trucks needed to be replaced. My marina was able to do this without removing the door, helm etc.
The Contact is Bill Shugart
who was very helpful:
bshugart@teakisle.com
(866) 633-7961
I am considering installing imitation teak flooring on my 2008 280DA. Does anyone know the square footage of the cockpit and the swim deck? I am getting quotes by the square foot and don't know what these totals are.
Thanks to anyone who can help!
Rich
New this year with a 2008 with twin 4.3 mercs and Alpha 1 drives. Don't know about engine flushing. Should I be flushing with fresh water while in dock? Is it difficult to hook up the flushing kits?