Search results

The two problems I face are 1.The Tyre. We simply only have 185 195 0r 205 Light Truck tires which are a bit skinny on the 14x6 rims and probably not up to the specs of the ST215/75R14C's that are on it at the moment. The other is the 0 offset of the rims and large centre bore. There simply...

Thanks for the advice. The rims are the same on both sides so dont think the directional thing is a worry. I have rang around the tyre shops here not only do they not have an alternative rim with the specs I need, also the tyres are not available in that size here so looks like my only option is...

Hi Guys I imported a 185 to Oz a couple of years back. Im hoping someone can advise the following. Had a blowout over the weekend and didnt have a spare tyre or rim to save me so I would like to find out the following so another weekend doesnt get ruined. Can anyone tell me who supplies...

Great thanks for your reply. You just saved me hours of diagnosis for a problem that didnt exist. Although I had it in the back my mind this may be the case that the nav lights activate the anchor light at the same time. I havent had the boat on the water yet so I didnt know. I guess this will...

Thats awsome! I installed two strips last night in the side compartments. I ran new wiring through the bow with piggy back connectors to the Anchor Light Switch. Only problem now is when I turn the Nav Light Switch on the Anchor light switch illuminates and the LEDs turn on. ( I take it this is...

According to the wiring diagram to tap into the all round / anchor light I need to tap into the grey/white wire and the black for the earth???

I get your question. To answer that I guess I would like the option to have them on when underway and specifically when anchored so I guess I would be best wiring to the anchor light which has a separate switch

Hi Guys.. Looking at installing some LED strip lights in the side panel storage compartments and the compartments under the glove box and steering wheel and want to bounce some ideas around. My aim was to wire these directly to the nav lights, however they are BLUE and have been told night...

Id appreciate the pics to see where u decided to drill. I want to do it right first time round. Our Sea Ray dealers in Oz suck as!#$. Prices are through the roof. Im so much better buying things from the states online even if I have to pay a heft postage fee. Ive found these that I quite like...

Hi guys anyone done an install for rod holders on a sea ray 185. I would be interested in what types and where they were mounted and bought from etc as there is no rails to mount them on. I have seen sea ray monogrammed stainless rod holders somewhere but havent been able to locate them...

Thanks Scorpio.. I think u hit the nail on the head it definately seems to be a timing issue... however. Being a newby, before i checked the current timing i loosened the distributor which possibly moved a bit before I threw the light on it as timing was showing around 2deg ATDC at idle. I...

Hi guys.. Got an 06 185 sport with the 3.0lt Mercruiser and TKS carby. The problem I have is as follows... Under WOT or full throttle esp when under load or heats up I hear a pinging or arcing noise from the motor. To try to remedy this by doing the following. 1. I filled with fresh gas and...

Hi Guys... Has anyone got a soft copy of the Seloc Mercruiser Stern Drive/Inboard 2001-2008 Repair Manual or equivalent? Feel free to PM me. tks (.)(.) http://www.repairmanual.com/marine/6/14470

Thanks Dennis. Appreciate the input. I have bought an aftermarket tower already but if you can get me a price on the graphics kit it would be appreciated. Its a shame that the bolster on the bolster seat is not interchangeable with the standard ones.

Hi guys this is my first post please be gentle. I will be soon taking possession of a 2008 Sea Ray 185 sports My questions are as follows: I need to obtain the of the Extreme Graphics for both sides (sea ray part number 1803287) or even better the complete decal kit with the rear decals as...