liv2ryde100
Active Member
Any chance u can list some motor grounds to check ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
I had the same issue. I opened up the thermostat and moved one of the wires to another terminal to bypass the thermistor. Runs cold now. Yes, it runs at it's coldest all the time but it's 19 years old so I'll run it like this until it dies completely and then worry about it.Anyone replace their cockpit fridge? What model did you go with? Mine runs but does get cold at all.
Update, I lubricated the track with a dry silicone lubricant that made most of the issue go away.Anyone have major issues with your Cabin door jamming? Replaced the broken truck but the new one destroyed itself in one day. The door just does not feel like it is sliding like it should. Should I lubricate the bottom track with marine lubricant as a start? I will be taking pics of the top and bottom tracks and update this post over the weekend. Thanks in advance for any input.
sunfly has become popular - not sure about using it under way though.....there was never a factory camper offered for the 340, so you would be looking at a custom job, plan 5-6kHI all scheduled to close on my 2006 DA340 next week. Very excited!
looking for shade advice. I want to add rear shade over the cockpit since mine didn't come with the camper canvas.
is there a source for adding the OEM rear camper back with all the pipework? or is this a custom job at this point?
I also found an option which looks interesting and affordable here...
https://www.canvasdesigners.com/online-store/Economy-Sunfly-Pole-72-pair-p69520025?forcescroll=true
does anyone have any experience with this setup?
thanks
for any response
HI all scheduled to close on my 2006 DA340 next week. Very excited!
looking for shade advice. I want to add rear shade over the cockpit since mine didn't come with the camper canvas.
is there a source for adding the OEM rear camper back with all the pipework? or is this a custom job at this point?
I also found an option which looks interesting and affordable here...
https://www.canvasdesigners.com/online-store/Economy-Sunfly-Pole-72-pair-p69520025?forcescroll=true
does anyone have any experience with this setup?
thanks
for any response
http://marinepropellers.com/ I got mine here a few years ago and were very good and priced right, : )Team 340,
Want to buy a new set of props for my 04 340 with 8.1s and VDrives. Want to pull, switch props, and relaunch same day so do not have time to take existing set off to have them gone over. Can someone recommend a good source or item number of the exact replacement? Looking for 4 blade. Per SeaRay I need 18" x 21" x 4.85 ZR4 1.5" Shaft.
hey just wanted to give everyone a heads up. treat your electronic interface modules very nicely. they are no longer available and sea ray's answer to that is to replace the unit with a lcd screen that is touchscreen. i was just quoted 6500$ for that part. gonna look into other options for myself
i checked them they have a retrofit kit for 3700$Check Flounder Pounder .. https://www.searay-parts.com/default.asp
i checked them they have a retrofit kit for 3700$