560sdl
New Member
Change building codes. on new construction
The building codes at the time were "probably" adequate, it is just that no one followed them for this type of structure. Most of these sheds were build by "good ole boys" without permits and inspections. And at the time the structures were unique enough that an inspector would not know if it was right anyway.
These buildings were not engineered, they were just built. Since most are 30-40 years old, they are mostly at the end of their useful lives. Pretty sure that now that there have been several total failures with significant loss of property, any future re-building will have to be done to modern codes and standards.
So recommendations for going forward?
1. Survey the remaining structures and make sure there are not significant problems. Have an engineers verify the capacities and make recommendations for repairs and adequate lateral bracing etc.
2. Or cut the roofs off and have open slips
3. Or rebuild to code and not have to worry
We did #1 above and determined ours was not repairable based on current codes. No engineer would sign off on the basic structure meeting code.
We considered #2, but as condo slips, that would be like pouring buckets of money in the water.
We concluded our only option was #3.
FYI, don't be surprised of the insurance companies start taking a harder look at these structures. These may become an uninsurable risk in the near future.